Instructions / Assembly
12
Use and Care
household filtration
Brita
®
Drop-in Filtration WHS-201
Usage and quality of water in your cold water line aect the life of filter cartridges.
Cartridges should be replaced sooner if water pressure at the faucet begins to drop
noticeably or if the filter fails to perform satisfactorily.
After prolonged periods of non-use, it is recommended that the filter be
flushed thoroughly. Let water run for 10 minutes before using.
The filter used with this filter housing has a limited service life. Changes in
taste, odor, and/or flow of the water being filtered indicate that the filter should be
replaced.
Part Number Description
WFBAB-200 Mounting Bracket
WFBAO-200 O-Ring
WFBAW-200 Housing Wrench
Replacement Parts
WFBAS-300 Mounting Screws (Package of 2)
Housing Filter Model Numbers
WHS-201 Drop-in Filtration
WHF-104 -Carbon Wrap Sediment Replacement
Drop-In Filter
Flow Rate: 5 gpm (18.9 lpm)
Operating pressure 30-100 psi (207-690kPa)
WHF-102 - String Wound Replacement Drop-In Filter
Flow Rate: 5 gpm (18.9 lpm)
Operating Pressure 30-100 psi (207-690 kPa)
WHF-103 -Poly Block Replacement Drop-In Filter
(included)
Flow Rate: 5 gpm (18.9 lpm)
Operating Pressure 30-100 psi (207-690 kPa)
Replace filters every six months or when flow rate
decreases significantly.
WHF-101 - Poly Pleat Replacement Drop-In Filter
Flow Rate: 5 gpm (18.9 lpm)
Operating Pressure 30-100 psi (207-690 kPa)
The above flow rates are not performance tested or Certified by NSF.