Instructions / Assembly
26
Usage and quality of water in your incoming water line aect the life of filter cartridges.
Cartridges should be replaced sooner if water pressure at the faucet begins to drop
noticeably or if the filter fails to perform satisfactorily.
After prolonged periods of non-use, it is recommended that the filter system be flushed
thoroughly. Let water run for 10 minutes before using. Note: This will empty the storage
tank.
The Redi-Twist
TM
filters used with this filter system has a limited service life.
Changes in taste, odor, and/or flow of the water being filtered indicate that the filter should
be replaced.
Please see the Performance Data Sheet for the certified performance of specific systems
with stated cartridges.
System Filter Model Numbers
USS-335 Reverse Osmosis Filtration System
Stages 1 & 3: USF-201 - Carbon Filter
Operating pressure 30-100 psi (207-690 kPa)
Stage 2: USF-205 RO Membrane Filter
Operating pressure 30-100 psi (207-690 kPa)
Description
WFBAS-300 Mounting Screws (Package of 2)
WFBAS-200 Eyedropper
WFBAS-400 Nitrate Test Strip
WFBAF-400 Kitchen Faucet Adapter
Replacement Parts Part Number
WFBAF-500 RO Air Gap Faucet (no tubing attached)
Replace membrane every 12 months
or sooner.
Brita
Reverse Osmosis Filtration System USS-335
Use and Care
connect to auxiliary faucet
WFBAF-300 1/4" Plastic Tubing (white)
WFBAF-350 1/4" Plastic Tubing (red)
WFBAF-375 3/8" Plastic Tubing (white)
WFBAF-425 Drain Connector Assembly
WFBAH-360 Redi-Twist 3 Stage RO Head Assembly (no shroud)
WFBAH-170 RO Auto Shut-O Diaphragm and Piston Parts
WFBAR-100 RO Flow Restrictor
WFBAT-300 RO Water Storage Tank
WFBAT-100 RO Storage Tank Fitting
Replace filters every six months or when
capacity is reached.
Also Available in a 2 pack as USFS-2332
Please see page 2 for component illustrations.
WFBAF-355 3/8" Plastic Tubing (red)