Instructions / Assembly

7
Version 2.0A
USS-335 installation instructions
• Locate cold water line in sink cabinet.
Turn o the cold water supply to sink.
• Turn on kitchen faucet to allow water
to completely drain from line.
• Disconnect cold water line from 1/2"
threaded stem on bottom of kitchen
faucet.
• Holding Kitchen Faucet Adapter in an
upright position (see diagram), screw
onto threaded faucet stem.
• Connect the cold water supply line to
the Kitchen Faucet Adapter. Firmly
tighten the nut.
Note: If rigid plumbing pipe (metal or plastic) is
used, you may need to shorten supply pipe using a
hacksaw or pipe cutter to accomodate the Kitchen
Faucet Adapter.
materials and tools needed
CAUTION
safety glasses
Step 1
Install Kitchen
Faucet Adapter
connect to auxiliary faucet
COLD
WATER
VALVE
WARNING