Instructions / Assembly

15
Version 2.0A
USS-335 installation instructions
materials and tools needed
utility knife
<< Step continued from previous page
Step 6
Connect Water Lines
connect to auxiliary faucet
Connect Tubing from RO System Head to Water Storage
Tank
• Use remaining 3/8" White Tubing
and determine length necessary to
connect Tank outlet (labeled "TANK")
on RO System Head to Water Storage
Tank.
• Cut 3/8" White Plastic Tubing square
with a sharp utility knife.
• Wet end of tubing and insert into
compression nut of Tank Connector
fitting (which was connected to tank
previously).
• Tighten compression nut to secure
tubing to Tank Connector.
• Insert other end of 3/8" White Plastic
Tubing into outlet of RO System Head
(labeled "TANK") approximately 5/8"
until it stops.
HOT
COLD
Packaged Items
Shown in White
Storage Tank
1/4” line to Tank
1/4” line to Faucet
3/8” line to Drain
1/4” line to Air Gap
1/4” line to Filter
Drain
Adapter
Kitchen
Faucet
Adapter
1/4" white tubing to filter
1/4" red tubing to
membrane drain
3/8" red tubing
to drain
3/8" white tubing to faucet
3/8" white tubing
to tank
Drain
Connector
WARNING
CAUTION