Instructions / Assembly

9
Version 2.0A
USS-323 installation instructions
• Determine lengths of 1/4" plastic tubing needed to connect to both inlet port to
Auxiliary Faucet Adapter and outlet port to Auxiliary Faucet.
• Cut 1/4" plastic tubing squarely on both ends to length.
• Avoid extra long lengths that may create kinks in the line.
• Insert all tubing into push-to-fit connectors as illustrated.
materials and tools needed
<< Step continued from previous page
utility knife
do not bend or crimp
cut squarely on both ends
do not cut at an angle
wet ends of tubing before inserting
A
1/4" PLASTIC TUBING
THEN CONNECT OTHER END OF TUBING
(A) TO INLET PORT ON SYSTEM HEAD
A
CONNECT END OF TUBING (A) TO
AUXILIARY FAUCET ADAPTER
1/4" PLASTIC TUBING
AUXILIARY
FAUCET
ADAPTER
SYSTEM HEAD
FINALLY CONNECT TUBING (B) FROM AUXILIARY
FAUCET TO OUTLET PORT ON SYSTEM HEAD
B
B
AUXILIARY FAUCET
NEXT INSERT TUBING (B) INTO END OF FAUCET STEM
INLET OUTLET
INLET OUTLET
SYSTEM HEAD
1/4"
PLASTIC
TUBING
Step 3
Attach tubing / fittings
to water line / head
connect to auxiliary faucet
WARNING