Instructions / Assembly

6
Step 2
Mark and Cut
Plumbing Pipe
whole house filtration system
• Turn o main water supply line.
• Turn on all faucets and drain lines
completely.
• Measure overall length of configured
system.
• Reduce this measurement enough to
allow for the amount of engagement
to determine how much pipe to
remove from the line.
• Mark section of plumbing pipe that
will need to be removed.
• Cut marked section from plumbing
pipe.
• Remove any burrs or debris from cut
pipe edges with a file.
Note: Measure twice, cut once!
Note: Use a pan or bucket to catch any remaining
water in the pipes.
materials and tools needed
1 2 3
30’
tape measure
safety
glasses
safety glasses
CAUTION
X
X
file
SOME INSTALLS MAY REQUIRE A
MOUNTING BRACKET TO SUPPORT SYSTEM
AND AVOID STRAIN OF WATER LINE
pipe cutter or
hacksaw
fittings to
purchase