Instructions / Assembly
10
Use and Care
whole house filtration system
Brita
®
Whole House Valve-In-Head Drop-in Filtration System WHS-202
Usage and quality of water in your incoming water line aect the life of filter
cartridges. Cartridges should be replaced sooner if water pressure at the faucet
begins to drop noticeably or if the filter fails to perform satisfactorily.
After prolonged periods of non-use, it is recommended that the filter system
be flushed thoroughly. Let water run for 10 minutes before using.
The filter used with this filter system has a limited service life. Changes in
taste, odor, and/or flow of the water being filtered indicate that the filter should be
replaced.
Part Number Description
WFBAB-150 Mounting Bracket
WFBAO-150 System O-Ring
WFBAW-150 System Housing Wrench
Replacement Parts
System Filter Model Numbers
WHS-202 Valve-In-Head Drop-in Filtration System
WHF-103 -Poly Block Replacement Drop-In Filter
Flow Rate: 5 gpm (18.9 lpm)
Operating pressure 30-100 psi (207-690kPa)
WHF-102 - String Wound Replacement Drop-In Filter
Flow Rate: 5 gpm (18.9 lpm)
Operating Pressure 30-100 psi (207-690 kPa)
WHF-104 -Sediment Carbon Wrap (included with
system)
Flow Rate: 5 gpm (18.9 lpm)
Operating Pressure 30-100 psi (207-690 kPa)
Replace filters every six months or when flow
rate decreases significantly.
WHF-101 - Poly Pleat Replacement Drop-In Filter
Flow Rate: 5 gpm (18.9 lpm)
Operating Pressure 30-100 psi (207-690 kPa)