User guide

6
Specifi cations
Specifi cations
Inlet connections: 15mm compression with 150mm between centres.
Outlet connection: G1/2”
Operating pressure range: Min. 0.1 bar - Max. 5.0 bar - Maximum recommended
imbalance between hot and cold supply should not exceed a ratio of 5:1.
Note: ARECO SHXSMFF C Min. 1.0 bar - Max. 5.0 bar
Maximum static pressure: 10 Bar
Maximum outlet temp: Factory pre-set to 38°C
(can be re-set to suit site conditions). If the temperature is re-set to suit different site
conditions the valve will work adequately however the TMV2 scheme will not apply.
Supply requirements:
Minimum cold water supply temperature: 5°C.
Maximum cold water supply temperature: 25°C.
Maximum hot water supply temperature: 80°C.
(a maximum hot water supply temperature of 60 - 65°C is recommended for
ablutionary purposes)
For latest prices and delivery to your door visit MyTub Ltd - www.mytub.co.uk - [e-mail]