User guide

21
Installation - Riser Rail cont.
3.Insert riser rail
Insert the plastic bracket insert as shown
into the wall bracket and slide the riser
rail down through the bottom wall bracket
ensuring the two holes in the riser are on
the top
4. Fit hose retainer & slider
Push the hose retainer (fi rst) and slider
down onto the riser rial, ensuring they are
the correct way up - as shown.
5. Attach top wall bracket
Push the top wall bracket onto the riser
rail, ensuring the rail is vertical mark the
centres of the fi xing holes in the top wall
bracket onto the wall surface.
Remove the top wall bracket and drill
suitable holes and insert the wall plugs
supplied.
Insert the plastic bracket insert into the
top wall bracket and refi t the wall bracket
onto the riser rail. Align the fi xing centres
up witht the holes and secure in place
using the screws provided.
6. Fit end caps
Push-fi t the wall bracket end caps onto
position to cover the fi xings.
Bracket
Insert
Bottom wall
bracket
End cap
Slider
Hose
Retainer
Top wall
bracket
Bracket
Insert
Fixings
For latest prices and delivery to your door visit MyTub Ltd - www.mytub.co.uk - [e-mail]