User guide

15
Installation Requirements
Flow Regulators
This shower valve is supplied with 2 x 7
litre per minute fl ow regulators loose in
the box (pre-fi tted to ARECO SHXSMFF2
C) which must be fi tted in each water
inlet when installed in conjunction with an
instantaneous water heater/combination
boiler.
Fitting both fl ow regulators and turning
the water heater/combination boiler to its
hottest setting, will ensure a suffi ciently
hot water supply to the shower valve
during winter months (in the UK), when
the mains cold water supply is at its
coldest.
In the event that this shower valve is not
installed with an instantaneous water
heater/combination boiler, the fl ow
regulators may be removed. Please follow
the steps detailed to remove the fl ow
regulators.
Using a thin fl at bladed screwdriver or
similar tool, carefully prise the inserts out
of both inlets (1 & 2).
With the inserts removed from the inlets,
the fl ow regulators must be fi tted as
shown, with the small diameter fi rst (3 &
4).
Note: The ARECO SHXSMFF2 C is
supplied with the 2 x 7 litre per minute
fl ow regulators pre-fi tted. If required they
can be removed and the inserts supplied
loose in the box fi tted.
1
2
3
4
For latest prices and delivery to your door visit MyTub Ltd - www.mytub.co.uk - [e-mail]