Instruction Manual

LYNX

System Instructions

ZONE PRESETS

Zone Presets allow you to create custom parameter profiles that can

be quickly assigned to a Zone during Edit Parameters. Each Preset

profile will auto-fill the fields in Edit Parameters with the selected

profile’s parameters. All Preset tabs (Normal Mode, Idle Mode,

Advanced) will be assigned when applying the preset profile to a Zone.

ALARM LOG

The Alarm Log Tab tracks and logs all Alarms experienced by the

system. For further detail on an alarm event, pressing the “Go To Zone

History” button will bring up the Zone History Graph, centered on the

event in question.

REMOTE ALERTS & ADVANCED

The Remote Alerts tab allows for the configuration of email alert

notifications. A valid email and SMTP server for the Operator Interface

to use to sends alerts with must be provided by the user in order for

the OI to be able to send remote alerts.

The Advanced tab details additional SMTP authorization and

connection type settings for use with the Remote Alerts.

The Alarm Settings Tab allows you to set which groups activate the

dry contact relays. The Alarm Delay will cause the system to wait a

set period of time before activating the dry contact alarm. If the

condition is resolved before the delay time is reached, then the alarm

will not be activated at all. The Number of Zones Before Alarming

setting can be used to only trigger the dry contact alarm if multiple

alarm conditions exist. Alarm Types can also be set from this tab—

high temperature, low temperature, over current, jacket problem, etc.

Only conditions that are selected will be considered. On this tab, you

can also set the Master Contact Behavior—to either ignore group

alarm settings and activate the master contact when any alarm is

present, or only activate the master contact when a group alarm is

present.

ALARM SETTINGS