Phau Ntawv Qhia

K-Series (KE, KK, KM)
Constant-Wattage Heating Cable
Instruction Manual
You must read and understand this manual before installing,
operating, or servicing this product. Failure to understand
these instructions could result in an accident causing serious
injury or death.
Keep these instructions for future reference.
Language Page
English ..................................................................................................................................... 1
Spanish (Español) .................................................................................................................... 16
French (Français) ..................................................................................................................... 31
German (Deutsch) ................................................................................................................... 46
Italian (Italiano) ........................................................................................................................ 61
English
© BriskHeat Corporation. All rights reserved.
2
K-Series Heating Cable Installation Instructions
TABLE OF CONTENTS
Introduction ........................................................................................................................................... 2
Applications ........................................................................................................................................... 2
Approvals .............................................................................................................................................. 2
Important Safety Instructions ................................................................................................................. 3
Connection/Termination Kits Descriptions ............................................................................................. 4
Prior to Installation ................................................................................................................................ 4
Lead Termination Preparation ............................................................................................................... 5
End Termination Preparation................................................................................................................. 6
Power Input Connection Installation ...................................................................................................... 7
Splice Installation .................................................................................................................................. 8
Heating Cable Installation ..................................................................................................................... 9
Installing Thermal Insulation……………………………………………………………………………………..10
Electrical Insulation Resistance Test…………………………………………………………………………...11
Periodic Inspection Record ................................................................................................................... 11
Maintenance Instructions ...................................................................................................................... 13
Emergency Procedures ......................................................................................................................... 13
Troubleshooting Guide .......................................................................................................................... 14
Warranty Information ............................................................................................................................. 15
INTRODUCTION
Thank you for purchasing a BriskHeat FE series constant-wattage heating cable system. A heating
cable system is a combination of heating cable, connection / termination kits, temperature controller,
and accessories based on your particular application. Your heater is designed to provide a long and
efficient service life with function, reliability, and safety in mind.
All BriskHeat Constant-Wattage Heating Cable utilize a parallel resistance modular design. This allows
the heating cable to be cut to length and terminated in the field, without affecting the heating power per
unit length. The modular design enables the cable terminations / electrical connections to be made with
cold leads and cold ends (e.g. cable not heated in electrical junction box).
A temperature controller is required for all constant-wattage heating cable.
For additional information concerning this, or other BriskHeat products, please contact your local
BriskHeat distributor or contact us toll free (U.S. and Canada) at 1-800-848-7673 or 614-294-3376.
APPLICATIONS
Intended Applications:
 General Purpose Trace Heang
 Pipe/Tank/Vessel Heang
 Ordinary and Hazardous Locaons
 Dry Area Applicaons
Prohibited Applications:
 Outdoor use
 Immersion heang
 Use on non‐metallic fixtures
 Wet Area Applicaons
Ordinary Locations
Hazardous Locations
Class I, Division 2, Groups B, C, & D
Class II, Division 2, Groups F & G
Class III, Division 2
2014 / 35 / EU (Low voltage directive)
IEC 60519-1
2011 / 65 / EU (RoHS 2 directive)
2012/19/EU (WEEE Directive)
Approvals valid only when installed in accordance with all applicable instructions, codes, and
regulations.
APPROVALS