Instructions / Assembly

ManualsBrandsBrio ManualsKitchenCurved Top Loading Water Cooler Dispenser - Hot and Cold Water, Black

1

2

3

4

5

6

7

8

9

6

3. Install a Water Bottle

IMPORTANT: To prevent dry heating, do not turn on the dispenser until you complete the steps

in this procedure.

NOTE: This dispenser is compatible

with 3 and 5-gallon water

bottles. It is recommended that

you purchase water bottles

equipped with a 55-millimeter

push cap.

A. Remove the plastic seal on top of the

bottle, but do not remove the protective

cap from the water bottle.

B. Clean the bottle cap and neck with a

damp, warm cloth.

C. Lift and turn the bottle upside down and

place it securely on the bottle support

collar (1). The inside of the collar is

equipped with a probe that pierces the

water bottle cap in order to avoid spills

and bacteria entering the water.

D. Wait 5 minutes for the water tanks to ll

with water before attempting to use the

dispenser.

E. Remove air from the tanks by placing

a cup under each water tap and drain

at least 4 cups (1 liter) of water before

initial use.

1