User's Manual

MJ192 GB Issue 02
10
8.4 During hatching the high humidity levels will fall dramatically when the door is opened and will take some time
to build up. Resist the temptation to open the door frequently – leave for at least 6 hours between inspections.
8.5 The Brinsea Advance Humidity Pump is available as an option on the Ova-Easy Advance incubators. The
incubator digital control system not only reads the humidity in the incubator but it provides a control signal to
operate the water pump and accurately maintain the humidity level at the desired level. Visit www.brinsea.com
for more information.
9 Egg Turning
The turning system has two modes of operation:
Automatic turning can be switched on for “multi-stage incubation” where the shelves are used for incubating
eggs and the hatching tray is used for the hatching of the eggs.
Automatic turning can be switched off for using the whole incubator to hatch eggs.
9.1 SWITCHING AUTOMATIC TURNING ON AND OFF
Press the - and + buttons simultaneously to unlock the Main Menu.
Scroll to the TURN 0 / 1 option and press OK to select the Turn on/off screen.
Press the + button to switch turning on (1) or the – button to switch turning off (0).
Press OK to return to the Main Menu and then scroll down to SAVE. Press OK to save the changes.
Automatic turning is ON Automatic turning is OFF
9.2 SETTING THE TURN DELAY INTERVAL
Press the - and + buttons simultaneously to unlock the Main Menu.
Scroll to the TURN INT option and press OK to select the Turn interval screen.
Press the + button to increase and the - button to decrease the turn delay interval between 30 and 180 minutes in
increments of 15 minutes.
Press OK to return to the Main Menu and then scroll down to SAVE. Press OK to save the changes.
9.3 STARTING A TURN
TO PREVENT THE RISK OF POSSIBLE INJURY OR DAMAGE TO THE MECHANISM NEVER
INITIATE A TURN WITH THE DOOR OPEN.
DO NOT OPEN THE DOOR WHILE THE SHELVES ARE MOVING. AN ALARM SOUNDS AT THE
START OF EACH TURN TO WARN THE OPERATOR. THE SHELVES MAY BE STOPPED BY
PRESSING ANY BUTTON ONCE.
A turn may be started at any time regardless of whether automatic turning is switched on or off. This may be to
check the system or to level the shelves to access the trays.
Press the OK and - buttons simultaneously. The alarm will sound and the shelves will start to turn. Always
ensure the shelves are free of obstructions and the door is closed during turning.
The motor may make a “clacking” sound when it starts. This is the anti-reversing mechanism operating and is
perfectly normal.
T*37.5C
H*45% /
T*37.5C
H*45% =