TimeLapse HD Video Camera TLC 200 f1.2 User Manual www.brinno.
Follow Brinno Now Length of battery usage Time Interval Capture Frames Battery Life ASAP 5 Seconds 10 Seconds 20 Seconds 30 Seconds 1 Minute 5 Minutes 10 Minutes 1 Hour 4 Hours 24 Hours 450000 300000 260000 210000 180000 120000 34560 17280 2880 720 120 2.5 Days 3.6 Days 17 Days 30 Days 48 Days 62 Days 83 Days Brinno TimeLapse Camera TLC200 f1.
Thank you for purchasing a Brinno TimeLapse Camera! The Brinno TimeLapse Camera (TLC200 f1.2) uses unique Time Lapse and Power Saving technologies to capture images for days, weeks, or even months. The Brinno TimeLapse Camera TLC200 f1.2 captures photos and stores them as videos making them easy to view.
Package Contents 1 AA AA AA AA SD 2 3 1 TimeLapseCam (TLC200 f1.2) 2 4 AA Batteries 3 SD card* * SD Card may or may not be included, please check the contents list on the package . Parts of the Camera Front 6 Back 12 4 7 1 8 9 2 10 3 11 5 13 1 SD Card Cover 2 Connector for Extension 4 Metal Ring 5 6 3 Connector for Micro USB cable 7 (For extension power supplier, DC 5V) 8 Accessories (For ATS100, ATM100) 2 Brinno TimeLapse Camera TLC200 f1.
Display Icons Set Up screen Normal 1 4 ASAP 2 OK 2011/08/31 22:58:32 3 5 Preview screen 1280x720 6 READY 7 BATTERY EMPTY 8 SD 10 SD ERROR 1 Capture mode Normal: Time Lapse mode Shutter: Shutter Line mode Motion: Motion Activated mode 2 Time interval Select the pre-set time interval or customize yourself. 3 System date and time 4 Battery level Icon Description (green) Battery fully charged. (green) Battery partially discharged. Low battery. (yellow) Replace as soon as possible.
About Power Saving Set up screen Normal ASAP Preview screen 10 sec. 1280x720 Turn off LCD 20 sec. OK 2011/08/31 22:58:32 READY 1 At Set Up Screen After 10 seconds without activity on the set up screen, the camera will go to Preview screen automatically. You can press the MENU or TIME button to go back to the set up screen. 2 At Preview Screen After 20 seconds without activity on the set up or preview screen, the LCD screen will turn off automatically to save power.
Initial Step-2 Install SD Card 1 2 3 1 Open SD card cover. 2 Insert SD card until it clicks into place. 3 Close SD card cover. Initial Step-3 1 Turning the Camera on 2 on 3 SD READING.. Normal ASAP OK 2011/08/31 22:58:32 1 Rotate the Power switch to ON position. 2 Process screen It may display other information on screen, please refer to page 3. 3 Set Up screen Now, you can set Date and Time and Time Interval before you use your TimeLapse Camera! www.brinno.
Initial Step-4 Set Date and Time 1 2 3 MENU Date & Time Set Date & Time 2011/ 08 /31 22 : 58 : 32 OK OK : Next 1 Press MENU button. 2 Press TIME ( ) to select Set Date & Time (MENU 5/10), and press OK. 3 At the highlight field, press MENU ( ) to decrease value, press TIME ( ) to increase value, press OK to confirm and go to the next field. When finished press OK to exit set up.
Start Recording 1 Set up screen 3 2 Normal ASAP Preview screen 1280x720 OK 2011/08/31 22:58:32 Turn off LCD OK Recording! READY 1 Turn on TLC200 f1.2, set time interval and press OK to Preview Screen. 2 Adjust lens angle to frame subject. 3 At Preview screen, press OK button to start recording, during recording period the LCD panel will turn off to save power.
Advanced Menu Setting AVI Playback Frame Rate You can change the videos FPS (frames per second) playback with this setting. 1 2 MENU Frame Rate AVI Frame Rate 10 FPS OK OK 10 FPS ( Frames Per Second ) means: 10 frames are played in 1 second. 1 Select AVI Frame Rate. 2 What frame rate should I use? Generally, use 10 FPS is suitable for Time Lapse video. 1 FPS: The video plays 1 frame per second, so the video will look not smooth, and the video length will be longer.
Time Stamp You can choose if you want to show the time stamp at bottom of your video. 1 2 MENU Time Stamp ON OFF Time Stamp OK OK 1 Select Time Stamp. 2 Select ON or OFF. Low Light Recording You can choose to enable your camera to keep recording video in a low light environment (< 5 Lux). 1 2 MENU Low Light Recording OK Low Light ON OFF OK 1 Select Low Light Recording. 2 ON: Allows your camera to record video in a low light environment.
Set Date and Time Set the correct date and time for your camera. 1 2 MENU Date & Time Set Date & Time 2011/ 08 /31 22 : 58 : 32 OK OK : Next 1 Select Set Date & Time. 2 At the highlight field, press MENU ( - ) to decrease the value, press TIME ( ) to increase the value, press OK to confirm and go to the next field. When finished, press OK to exit set up. Output Resolution You can change video resolution with this setting.
LED Display You can choose if the LED indicator will flash while capturing each frame, or not flash at all. 1 2 MENU LED Display ON OFF LED Display OK OK 1 Select LED Display. 2 ON: When the camera is capturing a frame, the LED indicator will flash once. OFF: During capture period the LED indicator will not flash . Band Filter Select the correct fluorescent lighting frequency to match your indoor lighting frequency. 1 2 MENU Band Filter OK Band Filter None 50 Hz 60Hz OK 1 Select Band Filter.
Firmware Version Display the current firmware version of camera. 1 2 MENU Firmware Firmware Version X.XX.X OK OK 1 Select Firmware Version. 2 Display the firmware version for 30 seconds, or press the OK button to exit. Reset You can reset your camera back to the default setting. 1 2 MENU RESET OK Reset NO YES OK Select Reset. Select YES and press the OK button to reset your camera.
Accessories Time Lapse Camera
Accessories Wide-Angle Lens (ATL045) MAGNET MOUNT CONVERSION LENS -0.45 WIDE-ANGLE- Enlarge your vision with Wide-Angle Lens! Capture the changes of magnificent scenery, and discover the city in a different way. You will capture an entirely new scene when you add the wide angle lens! Accessories Camera Pouch (ATP100) Easy way to secure your Time Lapse Camera and accessories.
Accessories Shutter Line (ATS100) SHUTTER LINE for Time Lapse Camera EASY to CREAT STOP MOTION VIDEO! In the past, in order to create stop motion video, you will need Hi-end equipment and lots of time to edit thousands photos. But now, the Brinno TLC200 f1.2 and shutter line will help you save time and make it easy to make a stop motion video! www.brinno.
Accessories Motion Sensor (ATM100) the Movement Detecting Activated & Record Waterproof: IP54 Detect Angle: 90ْ Motion Detected Detect Distance: 4 meters Perfect for HOME & PROPERTY SECURITY! Adding the Motion Sensor (ATM100) to Time Lapse camera (TLC200 f1.2), will allow the camera to detect any movement and wake up and take pictures automatically. It can take thousands of photos and convert them into a video, making them easy to review.
Specifications Camera Model LCD Screen Rotate Lens Waterproof TLC200 f1.2 1.44" TFT LCD 120° Optional, (In use with Weather Resistant Housing (ATH100)) Capture Mode Time Lapse Auto generate Time Lapse video Stop Motion Optional, (In use with Shutter Line (ATS100)) Motion Activated Optional, (In use with Motion Sensor (ATM100)) Optics Lens Aperture Lens type Field of View Focal Length Focus Distance F1.
www.brinno.com 7F, No. 75, Zhou Zi St., Taipei City 11493, Taiwan Phone: +886-2-8751-0306 Fax: +886-2-8751-0549 Email: customerservice@brinno.
