User Guide

PAGE 1
QUICK GUIDE AEB 1000 Camera Extender Kit { for BCC2000) WHAT'S IN THE BOX 1. Multi-task Dongle x1 2, 49ft (15m) Rugged USB-C Cable 1 3. Mounting Adapter 1 4, Cable Clip x1 5. Cable Ties x 10 (to secure cable path) ‘® QQ) sum » J INSTALLATION £% Insert 16 AA batteries into the Power Housing Battery Slot (ATH2000}. £ Plug the Multi-task Dongle {(ACB1000) Into your camera (TLC2000). Screw your camera onto the Mounting Adapter. Pass the USB cable through the bottom of your Power Housing (ATH2000).
PAGE 2
Plug the Cable ] Into the Mull-task Dongle using the left side port Use the other end of the Cable to plug Into your laptop. Plug the Battery Slot Miro USB connector £ into the right side part, Check that “5s Curse” Is shown on your camera LCD screen to confirm that the cable Is Installed correctly. Installation finished, {lows sd lock your Power Housing. Use Bierce Ties as-needed to secure the cable into place. Simultaneous Record & Download No need to stop recording.