User Manual w w w.br inno.
Package Contents 1- BirdWatchCam 2- Mounting unit 3- 2 Rubber straps 4- Measuring tape 5- User manual 6- 2 GB SD Card 7- 4 AA batteries Brinno Incorporated’s BirdWatchCam User Manual Thank you for purchasing the Brinno BirdWatchCam. The Brinno BirdWatchCam is designed to allow you to capture all those bird photos you miss when you’re not there. It’s comes complete with everything you need to begin capturing beautiful bird photos and is easy to set up and use. Lets get started.
-02 Mounting Unit Laser Pointer (Read WARNING LABEL on BirdWatchCam before using.) Mounting hole Optical lens Friction Lock Motion Sensor Door Latch Suction cup Power Button How to set up your Brinno BirdWatchCam 1. Remove the BirdWatchCam from the package. 2. Check to make sure that all the contents are included. 3. Open up the BirdWatchCam by gripping the back of the camera in one hand and lifting up firmly on the door latch where it says “PULL”. 4.
03- 1 1 3 2 12. Position the BirdWatchCam so there are no obstructions between the camera and your targeted area. 13. Once you have chosen your mounting distance simply adjust the focus distance by turning the lens to the matching setting, 1.5 M, 2M, 3M. 14. Now you want to pre-target the BirdWatchCam. Press the laser pointer button on the top of the BirdWatchCam and aim it at the mid point of the feeder or area you want to take photos of.
-04 19. It is not necessary to remove the mounting unit to use the mounting methods noted below. 20. You may choose to use the mounting straps to wrap around a tree or pole to mount the camera. 21. You may use the screw nail holes in the mounting unit to hang the camera. 22. You may use the suction cups to adhere to a clean flat surface. (we recommend using one of the straps as a safety line when using the suction cups) 23.
05- Setting up the time/date for your BirdWatchCam: a-The Time/Date program is preloaded onto the SD card included with your BirdWatchCam. ( if you have misplaced your SD card you can down load the Time/Date Program from www.brinno.com ) b-Insert the SD card into your computer. c-An icon titled ”Setup BWC” will appear on your screen. d-Click on this icon to open the set up program. Follow the directions to select the time/date settings for your BirdWatchCam.
customerservice@brinno.com Brinno Incorporated 7F, No.75, Zhou Zi St., Taipei City 11493, Taiwan Phone: 886-2-8751-0306 Fax: 886-2-8751-0549 301-0000-00 EN-A1 www.brinno.
