Instructions

ENGLISH 09
Firmware version
Displays the current version of firmware installed on the camera.
1. Select Firmware Version. 2. Displays the current version of
firmware for 30 seconds. Press the OK button to exit firmware.
Reference
CS-mount lens
The TLC200 Pro comes with a n interchangeable CS-Mount lens, so you
can change the CS-Mount lens by yourself to fit your shooting needs.
Extensional accessories
This extension connector is used for optional Brinno Time Lapse
accessories. Shutter Line (ATS110): For creating Stop Motion film and Face
Time Lapse video Motion Sensor (ATM110): For motion activated using,
turn your time lapse camera into a motion activated camera!
External Power
For long term use, you can attach an external power supply (DV
5V) through the Micro USB connector.
Micro USB connector
A. File transfer-You can connect the TLC200 Pro to your computer in order
to transfer the time lapse video from the SD card to the computer. OS
requirement: Windows 98 and above.
B. Webcam-With the TLC200 Pro connected to your computer you can install
free webcam software. The TOC200 Pro can then be used as a webcam
for your computer! Suggested software: please check on Brinno.com OS
requirement: Windows 98 and above.
Reset
You can reset your camera back to the default setting.
1. Select Reset. 2. Select YES and press the OK button to reset your camera.
Function Setting
Capture mode Time Lapse
Time Interval 2 seconds
Time Lapse Frame Rate 10 FPS
White Balance Mode Auto
Image Quality Better
Scene Daylight
HDR Range Medium
Time Stamp ON
Low Light Recording ON
LED Indicator ON
Band Filter None