TimeLapse Construction Camera - BCC100 ConstructionCamera Quick Guide w w w. b r i n n o .
CONSTRUCTION CAMERA - BCC100 1 TimeLapse Camera (TLC200 f1.2) 2 Weather Resistant Housing(ATH110) 3 Camera Wall 4 Rubber Strap Mount(AWM100) BCC100 - Installation STEP 2. Seal Insert an SD Card and switch on the Time Lapse Camera power. Insert the Time Lapse Camera into the Weather Resistant Housing, confirming the waterproof seal is aligned correctly. Keep the inside of the Weather Resistant Housing dry before inserting the Time Lapse Camera. STEP 3.
STEP 4. Start Recording 1 Set up screen 1 Sec 1. The LCD will display the set up screen. 2. Set the Time Interval and AVI frame rate. Suggestion Depending on big or small construction project , we suggest below setting: For days For weeks 5 Seconds 30 FPS 1 Minute For months For > 6 months 10 Minutes 30 FPS 10 Minutes 30 FPS 30 FPS Time Interval 2 Time AVI frame rate Frame Rate 10 Sec 30 FPS More than 6 months using , please choosing Energizer® Ultimate Lithium AA Batteries.
STEP 6. Finish Preview screen SD Optional Accessory ry O TG on e VELOPED DE s m ar tp h Brinno Reader (ABR100) Play your construction time lapse video on your smartphone on site. No need to go back to the office with the Brinno High Speed On The Go ( OTG ) Reader (ABR100) *Your Smartphone needs to OTG for this function. more info of ABR100 Motion Sensor (ATM100) Upgrade the time lapse camera to a motion activated camera, detecting any movement in thearea. Great for Security.
