Full Product Manual

1019097-B9
English Manual
9
8
9
x10
19
17
2
15
2
ASSEMBLY
Slide a Cotter Pin (19)
through the end of
the Tine Shaft (2). Using
pliers, bend the ends
over to secure the pin
in place.
CAUTION:
GLOVES ARE REQUIRED WHEN
HANDLING AERATOR TINES.
Tines have extremely sharp points.
Use caution when handling.
NOTE: The Bearings (9)
have two small openings and
extensions. These are designed to
sandwich the Tines (8), sliding
through and connecting.
Place a 5/8" Flat
Washer (15) on the Tine
Shaft (2) and push the
shaft through one End
Panel (1).
19
1
2
15
2
19
1
2
15
2
19
1
2
15
2
Step 3
Step 4-A
Add a Square Bearing (17) and a
5/8" Flat Washer (15) on the Tine Shaft (2)
as illustrated.
17
1
17
1