How to Guide

================================================================================================
L-1762-F12
STEP 7
------------------------------------------------------------------------------
19
32
10
14
11
11
10
FLIP THE AERATOR OVER:
A. Push the Axle Assembly (10) through the left side plate as far as possible
and rotate so the hole in the at plate faces to the rear as shown.
Find this hardware:
- x1 Hex Head Bolt (19) - 5/16” x 1.5”
- x1 Lock Nuts (32) - 5/16”
Install the Lift Handle Assembly (11) with the welded tube facing out, to the Axle Assembly (10).
Secure with Hex Bolt (19) and Nylon Lock Nut (32).
B. Slip Handle Grip (14) over end of Lift Handle Assembly (11).
NOTE: Soapy water will help while adding the handle grip (14).
NOTE: Make sure the
Axle Assembly Flat Plate (10)
and Lift Handle Assembly (11)
are pointing towards the rear
as shown.
ASSEMBLY: 40” Plug Aerator
(
PA-40 BH
)