Use and Care Manual

9
**Exterior circumference of washers can vary.
These dimensions are a measurement of the
internal diameter of the washer.
0”
2”
4”
1”
3”
5”
1/2”
**
3/8”
**
5/16”
**
1/4”
**
ASSEMBLY
================================================================================================
1018348-A
Push Arm Assembly
1. Attach upper push bracket (7)
to lower push bracket (6) and bottom
plate (13) using:
- x 2 Hex Head Bolts (30) – 3/8” x 2”
- x 2 Nylon Lock Nuts (41) – 3/8”
Assembly Step 6
Blade Assembly
3. Install bolt and nut stops to the blade ribs (10) using:
- x 4 Hex Head Bolts (28) – 3/8” x 3/4”
- x 4 Lock Nuts (41) * – 3/8”
*Note: Nuts need to be on the outside
edges of the blade ribs.
4. Set blade aside.
Assembly Step 5
10 10
41
28
28
41
7
6
13
41
30
41
30
41
41
9/16” Wrench & Socket
9/16” Wrench & Socket