Use and Care Manual

14
ASSEMBLY
================================================================================================
1018348-A
Assembly Step 15
36
17
39
26
30
16
14
20
Reinforcement Bracket
1. Attach the reinforcement bracket (17) and
pivot weldment (20) to both of the handle
tubes, upper (16) and lower (14), using:
x 1 Bolt (26) – 1/4” x 1 3/4”
+ x 1 Lock Nut (39) – 1/4”
x 1 Bolt (30) – 3/8” x 2”
+ x 1 Lock Nut (36) – 3/8”
7/16” Wrench & Socket
9/16” Wrench & Socket
Adding the Handle
4. Attach the upper handle
tube (16) to the lower handle
tube (14) using:
- x 2 Bolts (27) – 5/16” x 1 1/4”
- x 2 Lock Nuts (40) – 5/16”
5. Slid grip (20) over the end of the
upper handle tube (16).
Assembly Step 14
20
16
16
14
27
27
40
40
1/2” Wrench & Socket
DO NOT TIGHTEN FULLY. This part needs to pivot.