Instructions / Assembly

8
ASSEMBLY
================================================================================================
1018348-C
Blade Assembly
1. Attach ribs (10) to the
blade (11) using:
- x 4 Carriage Bolts (25) – 3/8” x 1”
- x 4 Washers (34) – 3/8”
- x 4 Nylon Lock Nuts (41) – 3/8”
Note: Do not fully tighten (yet),
these ribs may need to shift slightly
during Assembly Step 11.
Note: Ensure the ribs (10) are
aligned correctly. The ends with
three small cutouts on the rib
need to be at the base of the
blade. See illustration:
Assembly Step 3
25
25
34
34
41
11
34
41
41
34
41
10 10
25
25
9/16” Wrench
Assembly Step 4
24
24
24
24
24
40
40
40
40
40
11
12
1/2” Wrench
Blade Assembly
2. Attach wear bar (12) to bottom
of blade (11) using:
- x 5 Carriage
Bolts (24) – 5/16” x 3/4”
- x 5 Nylon Lock
Nuts (40) – 5/16”
English Manual