Instructions / Assembly

19
MAINTENANCE
================================================================================================
1018348-C
1. CLEAN AND DRY
The key to years of trouble-free service is to
keep you plow clean and dry
2. MOVING PARTS
After the rst 30 minutes of use, check all of the
fasteners for tightness. Thereafter, periodically
check all fasteners for tightness.
3. MOVEMENT
Check all moving parts for free movement and if
necessary, lubricate with oil.
4. BUILD-UP
Periodically remove debris build up
5. RUST
For rust appearing on painted surfaces, sand
lightly and point affected area with enamel.
6. ROTATION
After the wear bar has worn considerably, it
should be rotated (from bottom to top) to provide
a “new” edge. Remove the ve carriage bolts
(5/16”), rotate the blade, and then reassemble
the unit with the “new” edge on the surface.
CAUTION: Keep feet and hands clear of blade while raising and lowering the blade.
Pay close attention to your surrounding and people in your immediate area at all times.
English Manual