Instructions / Assembly

16
OPERATION
============================================================================================
1018348-C
CAUTION: Keep feet and hands clear of blade while raising and lowering the blade.
Pay close attention to your surrounding and people in your immediate area at all times.
NOTE: Do not adjust angle of blade while in transport position.
Operation Step 1
Transport Position
1. To raise your blade into transport position, pull the upper handle toward operator.
Note: Ensure the handle has been pulled back far enough to engage the
self-locking feature.
Changing the Blade Angle
1. Turn key switch off & engage parking brake, then lower
the blade to the ground.
2. Simply remove the hair pin beneath the push assembly
arm (see g 2.1) and pull hitch pit out (g 2.2).
3. Rotate blade to desired location (g 2.3).
4. Replace the hitch pin and secure hair pin underneath in
order to lock the blade in position.
Operation Step 2
Fig 2.2
Fig 2.1
Fig 2.3
English Manual
pull toward
operator
Fig 1