Instructions / Assembly

15
**Exterior circumference of washers can vary.
These dimensions are a measurement of the
internal diameter of the washer.
0”
2”
4”
1”
3”
5”
1/2”
**
3/8”
**
5/16”
**
1/4”
**
ASSEMBLY
================================================================================================
1018348-C
push arm
assembly
mower
bracket
45
45
1
Assembly Step 16
Mounting the Blade
1. Face the back of the
blade assembly toward
the bracket that you
added to your mower
in Assembly Steps 1-2.
2. The push assembly will
easily slide within the lower
tabs extending from the
mower bracket.
3. After aligning the
two sets of bracket holes,
insert the plated hinge rod /
pin (1) and secure with two
hairpin cotters (45), one on
each end.
Assembly Step 17
Mounting the Blade
4. Line up pivot
weldment (20) with the
pivot bracket (5) and
insert pin (3).
5. Secure with two hairpin
cotters (45).
5
20
3
45
45