Instructions / Assembly

14
ASSEMBLY
================================================================================================
1018348-C
Assembly Step 15
36
30
17
14
20
From Step 14, rotate the base of the
reinforcement bracket (17) to align with the
lower handle tube (14).
Straddle these two parts with the pivot
weldment (20) as illustrated. Attach using:
x 1 Bolt (30) – 3/8” x 2”
+ x 1 Lock Nut (36) – 3/8”
7/16” Wrench & Socket
9/16” Wrench & Socket
1. Attach the upper handle tube (16) to
the lower handle tube (14) using:
- x 2 Bolts (27) – 5/16” x 1 1/2”
- x 2 Nylon Lock Nuts (40) – 5/16”
2. Slide grip (20) over the end of the
upper handle tube (16).
As illustrated, loosely attach* the slotted
end of the reinforcement bracket (17) to the
upper handle tube (16) using:
x 1 Bolt (26) – 1/4” x 1 3/4”
+ x 1 Nylon Lock Nut (39) – 1/4”
Assembly Step 14
20
16
17
39
26
16
14
27
27
40
40
1/2” Wrench & Socket
NOTE: DO NOT TIGHTEN BOLT (30)
FULLY. This part needs to pivot.
English Manual
*This bolt (26) will be secured on step 15.
Fully secure Bolt 26 from Step 14.