Instructions / Assembly

12
ASSEMBLY
================================================================================================
1018348-C
Joining the Push Arm
to the Blade
2. Slide push arm assembly between ribs
and align with the pivot tubes that were
inserted on Step 9. Attach using:
- x 2 Hex Head Bolts (31) – 1/2” x 1 1/4”
- x 2 Nylon Lock Nuts (42) – 1/2”
3. Tighten the ribs to the
blade completely. (41).
Assembly Step 11
31
31
41 41
push arm
assembly
42 42
3/4” Wrench & Socket
Joining the Push Arm
to the Blade
1. Insert spacer / pivot tube (9)
into the large holes on the lower
part of the ribs (10) on the back
of the blade.
Assembly Step 10
10 1010 10
9
9
9
9
9-A 9-B
English Manual