Instructions / Assembly

==================================================================================================
ASSEMBLY
Assembly Step 7
Assembly is Complete!
Hardware Panel 7
2. At the other end of the
Upper Lever (18), you’ll nd
an oval and circular opening. Connect
the two levers by hooking the oval of
the upper level over the end of the
Lower Lever (55).
24
18
31
18
55
1. Slide the small grip (24) over the
end of the Upper Lever (18).
3. Starting between the lower lever (55) and the
hopper, pointing at an upward angle:
Run the 5/16 x 3/4” bolt (31) through the two levers.
4. Secure in place with a 5/16” hex lock nut (2).
18
55
31
English Manual
2
2
12
1018947-A