Instructions / Assembly

==================================================================================================
x2
2
42
42
22
2
2
42
21
29
22
ASSEMBLY
x2
2
37
Assembly Step 5-B
Hardware Panel 5
1. On one side, from an
outside edge, run a 5/16 x 3”
Hex Bolt (37) through the
support assembly (21) and
the tow bar (20).
2. Secure the bolt with a Hex Lock
Nut (2).
3. Repeat on the other side of the hopper
and then add tube caps (13) to the ends
of the tow bars as illustrated.
Assembly Step 6
Hardware Panel 6
37
2
21
20
13
1. Slide the grip (29) over
the end of the lift handle (22).
2. Utilizing the holes at the other end of the lift
handle (22), nd and align with the remaining two
holes of the support assembly (21).
3. From the outside edge, run two 5/16 x 1-3/4” bolts (42)
through the handle and support assembly.
4. Secure bolts in place with 5/16” hex lock nuts (2).
NOTE: For the next step, use the same side of the hopper as the transport lock (3) - added on Step 4.
English Manual 11
1018947-A