Instructions / Assembly

==================================================================================================
x2
ASSEMBLY
Assembly Step 4
Hardware Panel 4
7
31
31
Assembly Step 5-A
1. Align the top bolt
openings of the support
assembly (21) / wheels
(from step 1-B) with the
end of the tow bars (20).
NOTE: The support
assembly (21) will straddle
around the exterior edge of
the tow bars.
20
21
English Manual
3
46
46
2
2
2
HOPPER
ASSEMBLY
7
TRANSPORT
LOCK BRACKET
3
46
31
1. Add a 5/16” at
washer (46) to each
of the hex bolts (31)
from hardware
panel 4.
2. Align the transport
lock bracket (3) with
the hopper assembly (7)
as illustrated.
3. From the outside of the hopper, run the two bolts through the
transport lock bracket (3) and hopper assembly (7).
4. Secure the bolts in place on the inside of the hopper with 5/16” hex lock nuts (2) .
10
1018947-A