WiFi CCT A60 LED E27 or B22 Globe 21956 21957 Voice control USER MANUAL
Box content Smart CCT A60 LED E27 or B22 x 1 User Manual x 1 E27 Base B22 Base Technical Specifications Model No: 21956 21957 CCT LED: Warm White to Day Light Working voltage: 220V - 240V AC 50Hz Power: 9W 49mA Dimmable: via BrilliantSmart app Dimension: 112mm x Ø60mm Base: E27 or B22 Weight: 42g TA: 0...+35°C Classification: Class II Construction Security: Mac Encryption; WEP/WAPI/TKIP/AES WiFi Standard: IEEE802.11b/g/n System Req’s: iOS 8.0 or higher, Android 4.
Installation Guide IMPORTANT SAFETY ISSUES Ensure the power is disconnected before installing. This product is NOT suitable for damp or explosive environments. Modification of this product will void any warranty. Indoor use only. INSTALLATION POWER IS TO BE TURNED OFF AT EXISTING WALL SWITCH PRIOR TO INSTALLATION. Insert smart device into a suitable type light socket/lamp holder by gently pushing then slight twist till globe is locked in position clockwise.
Connect to your WiFi Ensure your mobile phone is connected to your 2.4GHz WiFi network. Your mobile phone and your smart device needs to be within good signal strength range of your WiFi router. (Refer to your router specifications for max range.) Download the BrilliantSmart App Please download the free BrilliantSmart app from the App store or Google Play store, or scan the QR code below. Register the BrilliantSmart App Open the BrilliantSmart app.
Configure your BrilliantSmart App Setting up your Home You can setup multiple homes or locations. Click ‘Add Home’ button. Or Click on ‘Home’ top left if you are adding or modifying details then ‘Home Management’ to setup your home(s), add or rename rooms and share devices. Add your Smart Device to your App 1. On initial power-on, the globe will begin blinking rapidly and be ready to pair.
3. The app will Automatically scan for device’s and once found will prompt ‘Devices to be added: x’. Select ‘Go To Add’. 4. Select ‘+’ to add device. 5. Verify your WiFi Network and Enter your WiFi Network Password. Connection will now Begin. 6. Once connected you will be prompt ‘Added successfully’. Select the room device is located. eg. ‘Lounge’. Select the pen icon to change the device name then select done. 7. The Smart Device can now be controlled by the BrilliantSmart App. Go to www.brilliantsmart.
Warning 1. To prevent injury, this apparatus must be installed Safely and correctly. 2. Do not open or tamper with smart device. Injury may occur. 3. For indoor use only. Not suitable outdoors. 5. Do not allow children to play with wall switch tuning ON/OFF rapidly. This can cause smart device to reset. 6. Power Surge/Power Loss could possibly reset smart device. If this happens follow setup instructions. NB: BrilliantSmart app screens may differ due to application updates & improvements.
Troubleshooting Problem: Smart device does not switch ON Possible Cause Suggested Solution No Mains Power Check connections, fuses and switches Problem: Cannot link smart device with BrilliantSmart app Possible Cause Suggested Solution 1. Modem signal weak Place device and modem closer together 2. Router/modem/smart phone firewall is enabled Disable firewalls on all devices 3. Internet connection is down Contact your provider 4.
