User Manual

Brillian
AI 2000 CIDRW
27
5.2 Read & write continuous test
5.2.1
Put tag on “TAG” (picture1)position
5.2.2
Execute write procedure （S18F11）
write data
5.2.3
Execute read p procedure （ S18F9 ） for verification data read
5.2.4
Put Tag on “a” position to write（S18F11）
5.2.5
Execute read p procedure （ S18F9 ） for verification data read
5.2.6
Put Tag on “b” position to write（S18F11）
5.2.7
Execute read p procedure （ S18F9 ） for verification data read
5.2.8
start over from 5.2.4 for 10,000 times without any fault.
【 picture 1 】
5.3 SAME TAG read & write continuously test
Use the same TAG to read & write and verify continuously
5.2.9 Tag put in（picture1）“TAG” position
5.3.1 Execute write procedure （S18F11）data =”BRILLIAN00000000”
5.3.2 Execute read p procedure （S18F9）for verification data read
5.3.3 Execute write procedure （S18F11）data = ”11111111BRILLIAN”
5.3.4 Execute read p procedure （S18F9）for verification data read
5.3.5 start over from 5.3.3 for 10,000 times read/write without
any fault.