User Manual

1. PULL CHAIN:
2. REVERSE SWITCH:
When the season changes, you may want to change
the direction your fan spins. To switch between
clockwiseandcounterclockwiserotations,ipthefan
reversal switch.
WARNING: Wait for fan to stop before reversing the
switch.
A. In cooler weather, clockwise rotation creates an
upwardairow,whichmoveshotairfromthe
ceiling into the room. Push the switch UP.
B. In warmer weather, counterclockwise rotation
createsadownwardairow,whichcoolstheair.
Push the switch DOWN.
• The fan pull chain is for motor speed control:
High, Medium, Low and Off. Pull chain once for
each position.
• Thelightpullchaincontrolsthelightxtureeither
ON or OFF with each pull of the chain.
OPERATING INSTRUCTIONS
Fan pull chain
Light pull chain
Reverse
switch
icon
Sun icon
12. Align two screws in the switch cover with the
keyholes in the switch box on the bottom of the
motor housing assembly (E). Push up to engage
the keyholes in the switch box, then twist to lock in
place.Immediatelytightenthetwoscrewsrmly,
then re-install the remaining screw previously
removed to fully secure the switch cover to the
bottom of the motor housing assembly (E).
FINAL INSTALLATION
H
B
FF
1
H
B
FF
2
3
13. Attach fan pull chain extension (BB).
Assembly is now complete.
Light pull chain extensions
x
BB
CC
1
x
1
Fan pull chain extensions
Screw
Switch cover
(special order)
Screw
Switch cover
(special order)
E
BB
G
Fan pull chain
Hardware Used
15
14
11. To install the fan WITHOUT the light kit (H), you
must special order a switch cover from our customer
service department at 1-866-473-4537, 8 a.m. - 7 p.m.,
EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday.
Loosen two preassembled screws from switch cover.
Remove and save remaining preassembled screw.