User Manual

12 13
FINAL INSTALLATION
5. Align the post of blade bracket (F) to the slot on the
bottom of the motor housing assembly (E). Secure
each blade bracket (F) using 2 blade bracket
screws (EE).
Repeat this step for the remaining blade
assemblies.
8. Removethepreassemblednial(K)andglasscap
(J) from the light kit (H).
9. Place glass (I) on the preassembled pipe on the
lightkit(H)untilitisushwiththepreassembled
metal disk. Thread light kit pull chain and fan pull
chain through center hole on glass (I). Secure
withpreviouslyremovedglasscap(J)andnial
(K). Tighten securely.
FINAL INSTALLATION
7. Connect the adapter plug of the BLUE wire from
the fan to the adapter plug of the BLACK wire from
the light kit (H) and connect the adapter plug of
the WHITE wire from the fan to the adapter plug
of the WHITE wire from the light kit (H). Align the
two loosened screws in the switch cover of the light
kit (H) with the keyholes in the switch box on the
bottom of the motor housing assembly (E). Push up
to engage the keyholes in the switch box then twist
to lock in place. Immediately tighten the two screws
rmly,thenre-installtheremainingscrewpreviously
removed to fully secure the light kit (H) to the bottom
of the motor housing assembly (E).
6. To install the fan WITH the light kit (H), loosen
two of the three preassembled screws in the switch
cover of the light kit (H). Remove and save the
remaining preassembled screw.
EE
Blade Bracket Screw x 10
Hardware Used
H
B
FF
5
H
B
FF
6
7
8
9
F
E
EE
Screw
H
E
H
Screw
White
Black
Blue
E
K
J
E
I
J
K
10
10. Attach fan pull chain extension (BB) and light pull
chain extension (CC).
Assembly is now complete.
Light pull chain extensions
x
BB
CC
1
x
1
Fan pull chain extensions
BB
CC
E
I
Hardware Used
To install this fan WITH the light kit (H), continue
to step 6. To install the fan WITHOUT the light
kit, skip to step 11.
Page 12