User Manual For CDMA mobile phone Avvio C612
Copyright©2011 Olive Telecommunication Private Limited All Rights Reserved Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Olive Telecommunication Private Limited Statement Some features of the product & its accessories described herein rely on the software installed, capacities & settings of local network, and may not be activated or may be limited by local network operators or network service providers, t
Safety Precautions Please read these simple guidelines. Not following them may be dangerous or illegal. For further information, see the section of “Warnings and Precautions”. Do not switch the phone on when Mobile Phone use is prohibited or when it may cause interference or danger. Do not place your phone and its accessories in containers with strong electromagnetic field. Obey all local laws. Always keep your hands free to operate the vehicle while driving.
Follow any restrictions. Wireless devices can cause interference in aircraft. Keep the phone and all its parts, including accessories, out of the reach of small children. Use only approved batteries and chargers. Disconnect the charger from the power source when it is not in use. Do not leave the battery connected to a charger for more than a week, since overcharging may shorten its lift. Only qualified personnel should service the phone or install the phone in a vehicle.
Content .1 Getting to Know Your Phone .................................................................................... 1 Basic specification ........................................................................................................... 1 Phone Overview .............................................................................................................. 1 .2 Getting Started...........................................................................................................
Change the input method .............................................................................................. 14 .5 Messages ................................................................................................................. 15 New Text Msg ................................................................................................................ 15 Inbox ..............................................................................................................................
Emergency Contacts...................................................................................................... 21 .7 Call History .............................................................................................................. 21 .8 Multimedia................................................................................................................ 22 Music player...................................................................................................................
Phone ............................................................................................................................ 30 Call ................................................................................................................................ 30 Display ........................................................................................................................... 31 Time & Date ..............................................................................................
.1 Getting to Know Your Phone Basic specification Size: 128*160 Standby Time: about 200 hours Talking Time: about 220 Minutes Notice: Standby time is the handset continuous working time without making phone calls. Standby time and talking time are both depending on mobile phone using situations, network situations and environments.
1 2 4 3 6 8 2 5 7
Item Description 1 Left Soft Key In standby mode, press left soft key to enter main Menu. 2 Right Soft Key In standby mode, press right soft key to enter Names. 3 Send Key Making or answering a call. In standby mode, press this key to enter the all calls screen. 4 End/Power Key End calls or reject calls. Long press: power on, power off.
5 6 4 Up Key In standby mode, press up key to enter Write Message. In menus or function options, press the key to scroll up. Down Key In standby mode, press down key to enter Phone Book. Hold the key to switch on/off the torch.In menus or function options, press the key to scroll down. Left Key In menus or function options, press the key to move to left. Right Key In menus or function options, press the key to move to right. OK Key Press the key to confirm your selection.
3. In editing mode, press the key to access the symbol list. Hash Key 1. In standby mode, hold the key to lock the keypad. 2. In standby mode, press the key to enter #. 3. In editing mode, press the key to change the input method. 7 Torch In standby mode, hold the down key to switch it on/off. 8 USB Jack Jack for earphone, charger & USB cable. Notice: Hold means pressing key more than or equal 2 seconds; short press means pressing key less than 2 seconds.
Icon Description Indicates signal strength. Indicates SD card available. Indicating the mobile phone is under roaming service mode. Indicating the keypad is locked. New message(s) indicator New voice mail(s) indicator When headset is connected. Alarm has been enabled. . Phone in General mode. Phone in Home mode. Phone in Outdoor mode. Phone in Silent mode. Phone in Office mode.
Icon Description Phone in Meeting mode. You’ve set your own profile. Indicating battery level.
.2 Getting Started Installing the battery 1. Remove the back cover 3. Insert the battery 8 2. Insert Memory card 4.
Charging the battery Prior to your initial use of the phone, it’s recommened that you fully charge your battery. If your battery level becomes two low, your phone would be automatically turn off, and you may lose some info. Connected the charger into the phone USB jack, and the other end into an electical outlet, and charge. You can use a shielded USB cable connecting to the computer for charging. Warning: Use only approved Olive batteries & chargers with your phone.
.3 Basic Functions Switching On/Off Press & hold the key to power on/off the phone. Making phone call Making phone call by dialing number 1. In the standby mode, enter a phone number & press Send Key. 2. To end the call, press the End Key. Notice: You can input P/T bypress [*] key, the number after P/T is extension number. Making phone call from Phonebook 1. In the standby mode, press Left key to access the Main menu > Phone Book; 2.
Making phone call from Call History 1. In the standby mode, press the Send Key to enter the Call History. 2. Select the history item, press Send Key to make the call. Speed Dialing In standby mode, press and hold one number key [1-9] to make phone call. See chapter 5 for more information about setting speed dialing number. Making a conference call Conference call is network services that allow taking part in a conference call with other participants. 1. Make a call to the first participant. 2.
Notice: The conference call service depends on local network provider. Before using the feature, please contact with your service provider. Answering the call Answer or silence an incoming call 1. To answer the call, press the Send Key or select . Press to mute the ringing tone before you answer the call. 2. To reject the call, press the End Key or select . Adjust the receiver volume Press the up/down navigation key to adjust the volume of the speaker during a call.
automatically re-locks. Options during a call During a call press left soft key to enter and you’ll have: End all calls, Names, Messages, Speaker/Handset, DTMF off(on), New call, Mute (Un-mute), Lock Keypad. Keypad lock key to lock the keypad; press left soft key & [*] key to unlock the keypad. Long press When the keypad is locked, only emergency numbers can be dialed. .
Input method Icon Predictive Description Predictive Predictive Predictive Multi-tap Word/sentence case text, only available at the beginning of a word/sentence.
Press to switch the input method; .5 Messages Your phone is capable of creating, sending and receiving text messages. New Text Msg 1. In the standby mode, press to access the Main menu > Messages > New Text Msg; 2. Enter your message. 3. Press and select Send. 4. You can send the messages to 10 receivers at one time. 5. Press the Send key to send the message.
Inbox 1. In the standby mode, press to access the Main menu > Messages > Inbox; 2. While viewing a message list, press to access the following options: View, Reply, Forward, Mark as Read/Unread, Call, Move to archive, Delete, Lock, Mark Several. Outbox 1. In the standby mode, press < Left Soft Key > to access the Main menu > Messages > Outbox. The Outbox contains two items: Sent & Unsent. 2. Enter Sent or Unsent box. 3.
2. Press to access the following options: View, Reply, Forward, Delete, Mark Several Drafts 1. In the standby mode, press < Left Soft Key > to access the Main menu > Messages > Drafts; 2. Choose the desired draft message, and press OK key to view. By pressing Options, you’ll have the same options as in New Text Msg. Templates 1. In the standby mode, press to access the Main menu > Messages >Templates; 2. Select the template message you want to use.
Settings and one of the following options: Priority, Auto Save，Delivery Report, Auto-Delete, Auto Scroll, SMS on Call Reject. Memory Status View the message memory status of your phone. .6 Phone Book You can store names and phone numbers (contacts) in the phone memory. Add Contact You can add new contact to phone. Contacts Press left soft key to enter the contacts and all the contacts saved in phone will be displayed.
Delete: Delete the contact from the phonebook. Add Contact: Add a new contact. Send Message: Send SMS to the contact. Add to Groups: Assign the contact to a group. Mark Several: Mark the desired items, and press Left soft key, then you’ll get options for Delete, Mark All or Unmark All. Groups 1. In the standby screen, press to access the Main menu > Phone Book > Groups; 2.
Enter the group member list, press left soft key you can have: Add Contact: Add members to group from the contacts list of phone Remove Contact: Remove the contact from the group. Speed Dial Use this menu to assign the speed dial numbers (1 to 9 items). The first 1 is defaulted as the voice mail number, you can change the others: 1. In the standby mode, press to access the Main menu > Phone Book > Speed Dial; 2.
Manage: Delete All Contacts: You can delete all the contacts saved in phone. Delete Multiple Contacts: You can delete the selected contacts saved in phone. Memory Status: You can view the memory status in phone. Settings View Type: You can choose to list out both Name & number of contacts or only list out the name. Emergency Contacts Emergency Contacts: The default emergency number is 911, *911, #911. .7 Call History Call history stores information about the last missed, received, or dialed calls.
.8 Multimedia Music player Press OK or Left soft key to enter the music player interface, then press Options to get the Following options: Now Playing: Allows you to view the current playing list. All songs: Allows you to view all songs stored in your phone & memory card. PlayLists: Add playlists to your player. Top 25 played: Allows you to view the 25 songs you’ve played latest. Playing options: Choose to play in Shuffle or repeat mode. Exit: Exit from the music player.
Picture size: Choose QVGA or VGA. Picture quality: Choose to get low/medium/high picture quality Shutter sound: Choose to enable or disable the shutter sound Save to: Choose the storage location, either to phone or SD card. Night mode: Enable or disable the night mode. Auto capture: Enable to auto capture the photos in 10s/30s or disable the function. Scenes: Choose the scenes for your picture, you have following options: Auto, Day, Night, Landscape, strong light, spotlight, Portrait & Movement.
2) If you want to take video, enter Settings: Mode: Choose Recorder. Audio format: You can choose default, EVRC or AMR format. File format: Choose the file format as 3G2, 3GP or MP4. Save to: Choose the storage location, either to phone or SD card. Night mode: Enable or disable the night mode. Special effects: Choose special effects for your video: Off, Black & White, Negative, Solarize & Sepia. ISO: Set the ISO parameter for your video: Auto, 100, 200, 400, 800 & 1600.
2) 3) Stop: After recording, press right soft key to stop. Options: Press left soft key to enter Options: Play last recorded: Play the file you’ve just recorded. Settings: File prefix: Enter the desired prefix for the recorded file. Memory: Choose the storage location for the recorded file, either to phone or memory card. Video Player Press left soft key to open the file from phone or memory card. Press OK key to start or pause the playing, and left & right key to move to next or previous video file.
.9 FM Radio Before listening to FM, please make sure the earphone is inserted. Press OK key to listen to the channel displayed on the screen. Use Left/right navigation key to switch the channels, and up/down navigation key to adjust the volume. Press Left soft key to enter Options: Auto Tracking: choose the option to auto track the available channels. Channel List: The channels tracked will be saved to the list. Add to Favorites: Save your favorites channels here. Turn On/Off: Turn on/off the radio.
view the images, videos,music and other files you’ve downloaded or stored in your phone or memory card. It also allows you to view the memory status of your phone & memory card. .11 Tools Your phone contains features to help organize your life. Alarm Clock Use this menu to set alarms. The alert type for a normal alarm corresponds to the call alert type settings. Alarm ring can be preferred ring in Phone or ring in My Data or Radio Alarm.
Udisc Mode Your phone can be used as a U disc when memory card is inserted. Games In standby mode, press
Call ringtone: You can select different rings as per you want it. Ringing Volume: You can adjust the volume of the ringtone. Vibrating Alert: You can choose to enable or disable the vibration. Incoming Call Alert: You can choose the ringtone for the incoming call. Message Alert: You can choose the ringtone for the incoming new message. Keypad Tone: You can adjust the volume of keypad. .
Phone Language: You can select display language English or Spanish. Auto Keypad Lock: Use this menu to set the keypad of your phone to lock automatically after a preset time delay when the phone is in the standby mode and no function of the phone has been used. Call Call Waiting: When the feature is enabled, you will get notification for a new incoming call when you are in a call. You can accept, reject, or ignore the incoming call.
International Prefix: In the standby mode, press
Backlight：You can control the time-out of the backlight on your phone. Operator Name: You can enable it to show operator name or not. Brightness：You can adjust the contrast of the display for varying lighting conditions. Time & Date Clock: Use this menu to choose to display Time in idle or not. Date: Use this menu to choose to display Date in idle or not. Time Format: Use this menu to choose the display shows the time which 12 mode or 24 mode, when the phone is in the standby mode.
Phone Lock：The phone lock feature protects your phone from unauthorized outgoing calls or Unauthorized accessing to information stored in the phone. When phone is locked, to unlock, user must enter the preset security code. When the device is locked, you can still call the official emergency number programmed into your phone. PIN Management: In the standby mode, press to access the Main menu >Settings > Security> PIN Management and one of the following menus: Disable, Enable, Change PIN.
.14 Care And Maintain If your mobile phone had abnormal conditions, please check it with the following table. If the problem still remains, please ask mobile phone sales for help. Common problems Check item Can not charge Please check if the charger is properly connects to the phone and the power source jack. Can not power on Please check if the battery level is too low; Please check if the battery is properly loaded; Please press Power Key enough time.
Common problems Check item Weak talk quality Please check if the phone signal is strong enough; If you are in the building, please move the phone or move near the window. The contact can not get your voice when making phone call Please check if your MIC has blocked by fittings or other blocks. Receiver sound is too low Please check if your receiver volume has been adjusted to the minimal.
.15 Safe Information Electronic Device Most modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your Mobile Phone. Consult the manufacturer to discuss alternatives. Hospital Do not take your phone into the operating room (OR), intensive care unit (ICU), or coronary care unit (CCU). Do not use your phone at places for medical treatment where it is prohibited to use mobile phones.
are reminded of the need to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants, or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked.
guide for detailed safety instructions. Do not connect incompatible products. As with other mobile radio transmitting equipment, users are advised that for the satisfactory operation of the equipment and for the safety of personnel, it is recommended that the equipment should only be used in the normal operating position (held to your ear with the antenna pointing over your shoulder). Care and Maintenance Keep your phone and all its parts and accessories out of the reach of small children and pets.
Do not drop, knock, or shake the phone. Rough handling can break internal circuit boards. Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the phone. Wipe it with a soft cloth slightly dampened in a mild soap-and water solution. Do not paint the phone. Paint can clog the device’s moving parts and prevent proper operation. Do not put the phone in or on heating devices, such as a microwave oven, stove, or radiator. The phone may explode when overheated.
Select Back standby time are greatly affected by the signal strength on the cellular network and the parameters set by the network operator. Battery charging time depends on the remaining battery charge, the type of battery, and the charger used. The battery can be charged and discharged hundreds of times, but it will gradually wear out. When the operation time is noticeably shorter than normal, it is time to buy a new battery. If left unused, a fully charged battery will discharge itself over time.
FCC Regulations: This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
is connected. -Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.
RF Exposure Information (SAR) This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States, Industry Canada of Canada. During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation of 15 mm.
This device is complied with SAR for general population /uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and Canada RSS 102, and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C, and Canada RSS 102. This device has been tested, and meets the FCC, IC RF exposure guidelines when tested with the device directly contacted to the body.
SAR compliance for body-worn operation is based on a separation distance of 15 mm between the unit and the human body. Carry this device at least 15 mm away from your body to ensure RF exposure level compliant or lower to the reported level. To support body-worn operation, choose the belt clips or holsters, which do not contain metallic components, to maintain a separation of 15 mm between this device and your body.
