Content 1 2 3 General Information ................................................................................................................................................. 3 1.1 Profile.............................................................................................................................................................. 3 1.2 Safety Information .................................................................................................................................
3.8 4 5 USB config.................................................................................................................................................... 15 Input method ........................................................................................................................................................... 16 4.1 Icons for Input Methods ................................................................................................................................ 16 4.
5.12 Games ........................................................................................................................................................... 29 5.13 Tools.............................................................................................................................................................. 29 5.14 Ideas ..........................................................................................................................................................
(network support is required). This can avoid economic loss caused by unauthorized use. Please take measures as following to avoid your phone being unauthorized use: · Set PIN code of SIM card · Set phone password 1.3 Safety warning and Attentions Safety warning ROAD SAFETY COMES FIRST Do not use a hand-held phone while driving. Use hands-free fittings when calls are unavoidable while driving.
INTERFERENCE The conversation quality of any mobile phone may be affected by radio interference. An antenna is built inside the mobile phone and located below the microphone. Do not touch the antenna area during a conversation, lest that the conversation quality deteriorate. QUALIFIED SERVICE Only qualified personnel may install or repair phone equipment. Installing or repairing the mobile phone on your own may bring great danger and violates the warranty rules.
Keep the mobile phone and all its fittings beyond children's reach. Keep the mobile phone dry. Keep away from rain, moisture, liquid or other substances that may corrode electronic circuits. Do not use or store the mobile phone in dusty places, lest that active parts of the mobile phone be damaged. Do not store the mobile phone in a high-temperature place. High temperature will shorten the life of electronic circuits and damage the battery and some plastic parts.
2 2.
2.2 2.3 Functions of Keys The mobile phone provides the following keys: Dial key Press it to originate a call by entering the called number or selecting a contact from the phonebook; or press it to receive an incoming call; or press it in standby state to show the latest call records End key Press it to end a call being dialed or end an ongoing call; or press it to exit the menu and return to the standby state; or hold it for two or three seconds to power on or off the mobile phone.
Please refer to their labels for other data related to the battery and the charger. 3 3.1 Getting started Installing the SIM Cards and the Battery An SIM card carries useful information, including your mobile phone number, PIN (Personal Identification Number), PIN2, PUK (PIN Unlocking Key), PUK2 (PIN2 Unlocking Key), IMSI (International Mobile Subscriber Identity), network information, contacts data, and short messages data.
Using code The mobile phone and the SIM cards support sorts of passwords, in order to prevent the phone and the SIM cards from being misused. When you are prompted to input any of the codes mentioned below, just input the correct code and then press the OK key. If you input a wrong code, press the Right soft key to clear it and then input the correct code. Phone lock code The phone lock code may be set to prevent your mobile phone from being misused.
PUK The PUK code (Personal Unlocking Key) is required to change a blocked PIN. It is supplied with SIM card. If not, contact your network operator. If you input wrong PUK code for 10 times, SIM card will be invalid. Please contact the network operator to replace the SIM card. Barring code A barring code is required for setting the call barring function. You can obtain this code from the network operator to set the call barring function. 3.
Battery level indication: Your mobile phone can monitor and display the battery state. Normally the remaining energy of the battery is indicated by the battery level icon at the upper right corner of the display screen. When the battery energy is insufficient, the mobile phone prompts "Battery low". If you have set an alert tone, an alert tone will be given off when the battery level is too low. A charging animation appears when the battery is being charged.
Using the Battery The performance of a battery is subject to multiple factors: radio network configuration, signal strength, ambient temperature, chosen functions or settings, phone fittings, and the voice, data or other application mode you choose to use. To guarantee the optimal performance of your battery, please stick to the following rules: Use only the battery provided by the vendor. Otherwise, damages or even injuries could be caused during the charging.
battery with other rubbish. Warning: Short-circuits of the battery may cause explosion, fire, personal injury or other severe consequences! 3.4 Powering On/Off the Mobile Phone Hold the End key for a while to power on the mobile phone. A power-on animation appears on the display screen. Input the phone lock code and press the OK key if the mobile phone prompts you to input the phone lock code. The original code is 0000 Input the PIN and press the OK key if the mobile phone prompts you to input the PIN.
Dialing a call to a number in the phonebook Enter the phonebook and use the up or down direction keys to find the telephone number you want to call. Press the Dial key. The mobile phone automatically dials the chosen telephone number. Redialing the last number In the standby interface, press the dial key to show the dialed calls. Answering incoming calls Press the Dial key or the Left soft key to answer an incoming call. Press the End key to end the current conversation.
COM port:Phone connected to a computer can access the serial port, PC Tools installed on your computer, you can synchronize mobile data 4 Input method This mobile phone provides three input methods, including English input ，Spanish input and numeric input. You can use these input methods when editing the phonebook, short messages, files and greeting text. 4.
4.4 English input and numeric input: English input: To input a blank, press Space. To clear wrong inputs, press the icon which has a arrow pointing to the left . 5 5.1 Using the menu Messaging If the short message memory is full, a blinking SMS icon appears on the top of the screen. To normally receive short messages, you need to delete some of the existing short messages. Write message Access this menu to create a text message. Inbox Received messages are listed in this menu.
Outbox The messages which are sent failed are stored in the Outbox. Sent messages Sent messages are listed in this menu. Delete messages You can delete messages stored in Inbox, Outbox, Drafts, etc through this function. Broadcast Message This network service enables you to receive a variety of text messages, such as broadcast messages about weather forecast or road conditions. At present, few networks provide this service. Please consult the network operator.
5.2 STK STK service is the tool kit of SIM card. This phone supports the service function .The specific items are depended by SIM card and network. Service menu will be auto added to the phone menu when supported by network and SIM card. 5.3 Contacts The mobile phone can store up to 300 telephone numbers. The number of telephone numbers that an SIM card can store depends on the storage capacity of the SIM card. The telephone numbers stored in the mobile phone and in the SIM cards form a phonebook.
multimedia message or Bluetooth. Add to blacklist: Add the selected number to blacklist. Mark several: Mark several phone numbers at a time so that you can perform a same operation on them. Phonebook setting: To set some parameters of phonebook. 5.4 Call log Missed Calls You can view a list of the latest missed calls. Note: When the mobile phone indicates that some calls are missed, you can select Read to enter the missed calls list.
Call Timers Choose call timers to view the last call time, the total time of all dialed calls and the total time of all received calls, and/or to reset all the time. Text msg. counter Choose text msg. counter to set the number of short messages sent and the number of short messages received. Note: This function does not relate to the SIM card. The number of short messages sent and the number of short messages received do not change even after the SIM card is replaced.
Format You can use this function to format all the data in the memory. The system will re-create a default folder. The formatted data cannot be recovered. Therefore, think twice before using the formatting function. 5.6 User profile The mobile phone provides multiple user profiles, so that you can customize some settings to adapt to the specific events and environments. Customize the user profiles according to your preference and then activate the user profiles.
the camera to the picture and then press the icon in the middle part of the bottom on the screen to capture photos. 5.8 Multimedia TV You are able to access this menu to watch mobile TV programs and add the programs you like to channel list. Before you watch TV programs, you’d better select the right area. Then you can search available channels and select channel to play.
Music Use this function to play audio files. By pressing the direction key can you control the playing process of audio player: switch to last song/next song （press left direction key or right direction key）, fast forward (press and hold right direction key) and rewind (press and hold left direction key), In audio player interface, you can press - or + key which on the left of the phone to turn volume. Sound recorder The phone support WAV and AMR. The AMR takes the compression algorithm.
formatted data cannot be recovered. Therefore, think twice before using the formatting function. 5.9 Portal Movil Log on Portal Movil through a web page. 5.10 Settings Services 5.10.1.1 Internet service This function enables you to view the internet. Your phone will ask you with existed way. You can start to view only by starting corresponding way.
recharging. Schedule power on/off: Set the time when the mobile phone will be automatically powered on or off. Alert: Before entering an area where the use of mobile phones is forbidden, make sure that the scheduled power-on function is deactivated to avoid accidents. Language: Select the display language for the mobile phone. Pref. input method: Select an input method as preferred input method as per your need. Greeting text: Access this menu to set greeting text and its content.
call number if others are calling you while you are already in a conversation. Call diverts: this network function enables you to forward incoming calls to another number you have previously specified. Call barring: The call barring function enables you to bar calls as needed. When setting this function, you need to use a network barring code, which can be obtained from the network operator. If the code is wrong, an error message will be prompted on the screen.
Reject by SMS: Reject an incoming call and reply the caller a short message to state that you are not available at this moment. Connect notice: Once this function is enabled, the phone would vibrate to remind you when a call is connected. Network Settings Contact the network operator to obtain the following network services: Network selection: Set Network selection mode to Automatic or Manual. Automatic is recommended.
Change PIN2: To change PIN2 code of PIN code. Phone security Phone lock: The function enables you to lock/unlock the phone. Once this function is enabled, correct password is required when the phone is locked. The password is 4 to 8 digits. Change password: to change phone password. Auto keypad lock: The function enables you to lock/unlock the keypad. Setting the auto locking time that 5s, 30s, 1min or 5mins is available. The keypad will be auto locked with no operation during the period.
Press the＋, －, ×, ÷, ＝ icons to select ＋, －, ×, ÷, ＝ respectively. Press back key to delete the figure. Stopwatch Stopwatch is simple application for measuring time with possibility to register several results and suspend/resume measurement. Notes You can record some information in this menu. 5.14 Ideas This function enables you to view the internet. You can log on Portal Movil, Mi Comcel, iPromociones, MSNGR, Plugger, etc. through a web page. 5.15 Music Use this function to play audio files.
5.17 Agenda Bluetooth With Bluetooth, you can make a wireless connection to other compatible devices, such as mobile phones,computers, headsets and car kits. You can use the Bluetooth to send images, video clips, music, sound clips and notes, and transfer files from your compatible pc. Calendar Once you enter this menu, there is a monthly-view calendar for you to keep track of important appointments, etc. Tasks You can create new memos through this function.
6 Appendix Appendix 1：Troubleshooting If you find exceptions when operating the mobile phone, restore the factory settings and then refer to the following table to solve the problem. If the problem persists, contact the distributor or service provider. Fault SIM card error Cause The SIM card is damaged. The SIM card is not in position. The metal face of the SIM card is polluted.
Poor received signal quality Signals are obstructed. For instance, radio waves cannot be effectively transmitted nearby a high building or in a basement.
The mobile phone cannot be powered on The battery energy is exhausted.
The mobile phone is not in a service area of the GSM network The battery cannot be charged The signal is weak The charging voltage does not match the voltage range indicated on the charger An improper charger is used Poor contact Move to the network operator's service area Move to a place where the signal quality is high Ensure the charging voltage matches the voltage range indicated on the charger Use the charger specially designed for the mobile phone Ensure the charger plug is in good contact with
FCC Regulations: This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
RF Exposure Information (SAR) This mobile phone meets the government’s requirements for exposure to radio waves. This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.
be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: WVBA921. For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and the positions the handset a minimum of 1.5 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.
