User guide

29
•
•
•
•
•
•
IMAGEMODE
• 0: Centers the image and no scaling takes place. If the image is bigger than the screen,
BrightSign crops the image.
• 1: Scales the image to fit so that it is fully viewable with its aspect ratio maintained.
• 2: Scales and crops the image so that it totally fills the screen with its aspect ratio maintained.
• 3: Scales the image so that it fills the screen and the whole image is viewable. This means that
the image is stretched and the aspect ratio may not be maintained.
VIDEOPLAYERAUDIOMODE <audio mode> (HD2000 only)
Sets the audio mode used when playing a video
• 0: Sets the audio to AC3 surround.
• 1: Mixes AC3 surround audio down to stereo.
• 2: Mutes the audio.
VIDEOPLAYERAUDIOOUTPUT <audio output> (HD2000 only)
Sets the audio output when playing a video
• 0 : Outputs analog audio.
• 2: Outputs SPDIF audio in stereo PCM.
• 3: Outputs SPDIF audio in raw AC3.
• 4: Outputs analog audio with SPDIF mirroring raw AC3.
VIDEOPLAYERAUDIOSTEREOMAPPING <stereo mapping> (HD2000 only)
Sets the analog output when playing a video. Use this parameter when the
VIDEOPLAYERAUDIOOUTPUT parameter is set to 0 – Analog audio.
• 0: Maps stereo audio to Audio 3.
• 1: Maps stereo audio to Audio 2.
• 2: Maps stereo audio to Audio 1.