User guide

23
•
•
•
•
•
•
Viewmode <setting> (default is 0)
You can use a view mode that is different from the default by setting the mode prior to starting
video playback. The view_mode values are:
• 0: Scales the video to fill the screen without maintaining the aspect ratio. Images may appear
stretched.
• 1: Centers the image and adds black borders. This is also referred to as letter boxed video. The
aspect ratio is maintained.
• 2: Centers the image and fills the screen. The aspect ratio is maintained.
imagemode # (default is 0)
The imagemode command specifies whether the image is scaled to the display.
• imagemode 0: Centers the image without scaling (may result in cropping if the image is
larger than the current videomode resolution).
• imagemode 1: Scales the image to fit the display. The whole image is displayed as large as
possible with correct aspect ratio.
• imagemode 2: Scales the image to fill the display while maintaining aspect ratio.
• imagemode 3: Scales the image to fill the screen without maintaining aspect ratio.
slideinterval # (default is 3)
Set the number of seconds between slides. The number must be an integer. For example:
slideinterval 3 inserts a 3-second pause between slides.
transition # (default is 0)
Set the transition between images. Transition commands include:
• 0: Changes images immediately with no transition.
• 1 to 4: Wipes the image from top, bottom, left, and right.
• 5 to 8: Explodes the image from the center, top left, top right, bottom left, and bottom right.
• 10 to 11: Divides the image into vertical and horizontal venetian blinds.
• 12 to 13: Comb the image both vertically and horizontally.