User guide
Table Of Contents
- Copyright
- Introduction
- Getting Started
- Playing Media with BrightSign
- Working with Playlists
- What is a playlist?
- Creating a playlist
- Playlist commands
- BMP, MP3, MPG (HD2000 only), VOB (HD2000 only), TS (HD110, HD210, HD410, HD810, and HD1010), PNG, JPG
- debug
- rem
- print
- (HD2000 only) audiomode # (default is 1)
- (HD2000 only) audiooutput # (default is 0)
- (HD2000 only) audiochan # (default is 2)
- volume # (default is 100)
- videomode
(HD110, HD210, HD410, HD810, and HD1010 default is 1024x768x75p; HD2000 default is 1280x720x60p) - Viewmode
(default is 0) - imagemode # (default is 0)
- slideinterval # (default is 3)
- transition # (default is 0)
- GPIOEnableInput
(HD410, HD810, and HD1010 only) - GPIOEnableOutput
(HD410, HD810, and HD1010 only) - GPIOOn
, ,… - PauseMS #
- PowerSaveModeOn
- PowerSaveModeOff
- lighton # or lightoff #
- waitbuttonany (HD410, HD810, HD1010, and HD2000 only)
- pause #
- stop
- Creating interactive presentations (HD410, HD810, HD1010, and HD2000 only)
- Using Excel to create interactive presentations
- Keywords
- VIDEOMODE
- IMAGEMODE
- VIDEOPLAYERAUDIOMODE
- VIDEOPLAYERAUDIOOUTPUT
- VIDEOPLAYERAUDIOSTEREOMAPPING
(HD2000 only) - VIDEOPLAYERAUDIOVOLUME
(HD2000 only) - AUDIOPLAYERAUDIOOUTPUT
- AUDIOPLAYERAUDIOSTEREOMAPPING
(HD2000 only) - AUDIOPLAYERAUDIOVOLUME
(HD2000 only) - FLIPELO (HD810, HD1010, and HD2000 only)
- GPIOEnableInput
(HD410, HD810, and HD1010 only) - GPIOEnableOutput
(HD410, HD810, and HD1010 only) - SerialPortSpeed
(HD410, HD810, HD1010, and HD2000 only) - SerialPortMode
(HD410, HD810, HD1010, and HD2000 only) - UDPDestinationAddress (HD1010 and HD2000 only)
- UDPDestinationPort
(HD1010 and HD2000 only) - UDPReceiverPort
(HD1010 and HD2000 only) - REGISTRYSECTION
- DELETEREGISTRYSECTION
- DELETEREGISTRYKEY
- EVENTS
- elo (HD810, HD1010, and HD2000 only)
- eloc (HD810, HD1010, and HD2000 only)
- button (HD410, HD810, HD1010, and HD2000 only)
- Keyboard:
(HD810, HD1010, and HD2000 only) - Remote:
(HD810, HD1010, and HD2000 only) - Serial:
(HD410, HD810, HD1010, and HD2000 only) - udp:
(HD1010, and HD2000 only) - timeout
- mstimeout
- videoend
- audioend
- STATE
- Controlling GPIO outputs from an interactive playlist
- Controlling serial output from an interactive playlist
- Controlling udp output from an interactive playlist
- Preloading images
- Simultaneous states within a single interactive playlist (HD2000 only)
- Interactive playlist examples
- Scheduling playback (HD210, HD810, HD1010, and HD2000 only)
- Working with Zones
- Working with Scripts
- Getting Help
- Learning more and support
- Frequently asked questions
- What video frame rates does the HD2000 support?
- How do I create portrait mode content on BrightSign?
- How do I connect a component display to the VGA output on the HD2000?
- How many displays can I connect to the BrightSign?
- Can I synchronize multiple BrightSign units?
- How accurate is synchronization?
- What can I synchronize on BrightSign?
- How do synchronized BrightSign units communicate?
- What is the maximum number of BrightSign units I can synchronize?
- Can I synchronize different BrightSign models?
- Do BrightSign units support Genlock?
- Troubleshooting
- General troubleshooting
- The BrightSign power light is on, but there's no display
- BrightSign isn't booting up properly / Err light is on or flashing (HD110, HD210, HD410, HD810, and HD1010 only)
- CF card is not recognized by BrightSign (HD2000 only)
- USB keyboard is not responding
- Elo touch screen coordinates aren’t working properly
- Problems with automatically playing files
- General playback problems
- Content Playback
- Troubleshooting Playlists
- Troubleshooting Interactive Playlists
- The demo files I downloaded work in my interactive playlist, but my files do not
- The interactive demo I downloaded works, but my interactive playlist does not
- My interactive playlists stops working when I press a button or try to provide any input
- Interactive playlists created using an international version of Excel don't work
- BrightSign and accessories
- BrightSign isn’t booting up properly / random lights lit
- BrightSign software update fails
- SD card works for playback, but can’t update BrightSign
- SD card is not recognized by BrightSign
- Video selector switch does not work
- USB mouse is not responding
- USB keyboard is not responding
- Elo touch screen coordinates aren’t working properly
- General troubleshooting
- Advanced Topics
- Selecting Compact Flash cards
- Other ways to update your BrightSign software
- Generating HD content for an HD2000 using Final Cut Pro
- BrightSign shell
- Using the registry
- Setting the date/time on BrightSign
- Using a custom boot script and logo
- Widescreen vs. 4x3 discussion
- Connecting BrightSign to your network
- Product Specifications
7
•
•
•
•
•
•
3 Extract the software update file onto your SD card. (The file name is UPDATE.ROK.)
4 Insert the SD card into your BrightSign and apply power.
•
HD2000:
Wait for your BrightSign to boot. (The display will be blank, but the LEDs on the front
panel light as the unit boots.) Wait for the red upgrade LED to light up. During the upgrade,
the connector activity LEDs turn on and off to indicate that the upgrade is in progress.
•
HD110, HD210, HD410, HD810, and HD1010:
Wait for your BrightSign to boot. (The display
will be blank but the Bsy LED flashes as the unit boots). During the upgrade, the yellow Upd
LED flashes to indicate that the upgrade is in progress.
NOTE:
When the update finishes, BrightSign deletes the UPDATE.ROK file and reboots the unit.
However, if the card was formatted with NTFS or HFS+, then BrightSign does not delete the
UPDATE.ROK file and the unit doesn’t reboot after the update.
Step 3: Try the demo
The BrightSign demo shows an example of an interactive digital sign that displays still slides and
video clips, and responds to input from a button board, touch screen, or mouse. It’s easy to try if
you have a BrightSign. Follow these steps:
1 Download the demo for your BrightSign model:
•
HD2000:
Click the
HD2000 Demo
link.
•
HD110, HD210, HD410, HD810, and HD1010:
Click the
HDCompact Demo
link.
2 Unzip the BrightSignDemo.zip file and copy the contents into the root directory of an
SD card.
3 Connect your BrightSign to either of the following:
•
Elo touch screen
•
Standard monitor and USB Mouse
•
Standard monitor and Roku Button Board
4 Insert the SD card.