User Manual

String Lights with Solar Panel

User Manual

Step 1: Screw out the old one from the holder counterclockwise.

Step 2: Screw up a new one properly clockwise.

Step 3: Complete.

1. Connect the string lights with solar panel and hang up with cable ties.

Uncover the USB charging port on the side of the panel. Recharge the the built-in batteries

if the weather is poor, such as in rain or cloudy day. The indicator on panel will turn red during

charging or in low power, it will turn green when the battery is fully charged.

5V 1A

1. Solar panel: 3.4W/5.5V(19% efficiency)

2. Charging time: 8-12H(solar), 7H(USB charger 5V 1A)

2. If the string lights do not work, make sure the solar panel is not covered by other things.

If the above cases do not work, ask a professional electrician for help or contact us.

3. If the string light do not work, recharge the solar panel or place it in the sunlight.

4. The light flashes, do not make the solar panel sensing the bulb light.

1. If the string lights do not work, make sure the solar panel is switched on.

25%, 50%, 75%, 100% Brightness

6H, 8H Timer

Steady On, Breath, Flash Mode

ON/OFF

Speed - / +

USB-Type C Cable

2. Press the button on the back of panel to switch on, the indicator will turn blue.

The string light will be on at dusk and will be off at dawn automatically.

2 x AAA 1.5V Battery Operated

(NOT included)

Indicator

1 x Remote

5. If the remote does not work, the battery may exhaust, replace with new battery.

3. RF Remote working range: 32-96 feet

E26 base

3. Use the button on remote to set timer(the lights will flash once when timer set), brightness,

speed or modes.