User Guide

Inspect the
Trace for any
visual
damage
Connect the
Trace to the
charger
Power on
the Trace
Connect to
the Trace
Bluetooth
Test all
Trace
Functions
1
3
4
Inspect electrical cables
and connectors
Inspect handle and surfaces
for any damage
1
2
3
Connect charger to 110V
outlet
Connect charger to Trace
charging port
Expected Charger LED Behavior
Flashing Blue – Ready to charge
Expected Charger LED Behavior
Solid Red – Charging
Confirm the charger LED is
Solid Red
and wait 5 minutes before powering on
for remaining checks
1
2
Push the Traces Primary
Power switch
Press and hold the display
power button
Primary power switch will illuminate
Red when engaged
LED’s on the display will illuminate
Blue when powered on
After completing these initial
checks, ensure the Trace is
powered off and connected to
the charger. The Trace must
reach 100% charge prior to first
use by an operator.
2
3
Open the BrightDrop mobile
app and login
Nearby Assets
00000001
00000002
00000003
00000004
00000005
Identify and select the Trace
ID in the nearby assets list
Lock both caster wheels
Confirm Trace is charging
1
Unlock & open the door
2
4
Close & lock the door
Throttle forward/reverse
3
Hand brake & horn
3
Disconnect the charger
from the Trace
1
Get the BrightDrop App
2
Lower the handle into the
operating position
5
Maneuver the Trace and check
for squeaks and rattles
QUICK START GUIDE – TRACE V1.2
This guide serves as a quick reference to receiving and starting up a new Trace upon delivery. This guide DOES NOT
replace the
User Manual. You must read and understand all guidelines, directions and warnings contained within the
User Manual and be authorized to receive, inspect and operate a BrightDrop Trace by your organization and/or
BrightDrop.
Trace Version 1.2 | Rev 1.2 - 2022
1. Unlock in app
2. Push latch release
1. Close doors
2. Lock in app