User's Manual Part 1

communicating on the wireless network. If multiple keys

are present, the one selected must match the key being

used on the access point or other computer the Device

will be connecting to.

Manage Networks

You will have one or more network interfaces on the device, such as Ethernet

and WLAN. Each interface can have one or more sets of configuration data,

referred to as a profile. Profiles are manipulated on the Network and Wireless

Settings pages. The Manage Networks page allows you to make a configuration

profile active for an interface, restart the Ethernet interface, and stop/start/restart

the WLAN or other optional network interface.

Ethernet Adapter

The Ethernet network interface is always present and active on this device. The

device is factory configured with a default profile that is initially set to obtain an IP

Address via DHCP. You can change this profile on the Network Settings page.

Enable Button

Enable the interface when it has been previously disabled

Disable Button

Disable the interface, preventing any traffic across the

interface

Restart Button

This button can be used to restart the Ethernet network

interface with the currently active profile settings.