Exhibit D Equipment ID. Label BRIGHT HEADPHONE ELECTRONICS CO. FCC ID.: IERD1989 Wireless Stereo Center Speaker System) 1. A label in the next page will be affixed to the base of the device.
37 INT) Ceiling Ens || Chimer | Ere RE | | FCC ID: IERD1989 | | [mien T MODEL RF-T989 SERIAL# THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION 18 SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
User's Manual BRIGHT HEADPHONE ELECTRONICS CO. FCC ID.
OVERVIEW The High Frequency Wireless Stereo Center Speaker System uses the latest 900MHz wireless technology to enable you to enjoy music and TV sound anywhere inside or outside your home (speakers are not weather resistant). You can simply connect the supplied transmitter to any sound source such as a stereo, CD player, TV, etc, through either an audio line output jack or headphone jack. This speaker system is easy to set up anywhere you want, without tuning speaker wires.
Lee. don 3@ O® A Tuner (8 Tuner 2 ROLLMOP Three-step DC 18V 40 Power Spo (@ Volume 3 A) Transmitter 49 DC input Switch 3 Recharge Switch RILE FT # Only use the supplied C/SPK AC power adapter RIGHT { DCOV/B00mA } Accessories 1.Connecting cord Stereo jack to 2 RCA plug (1) 2 Stereo mini-jack 3.5mm cable(1)} 3.AC adapter for transmitter DC 18V/1 00mA(1} 4 AC adapters for speakers 12V 1000mA(2) 5.Headphone jack adapter 6.3mm to 3.
INSTALLATION Connecting Transmitter To center speaker TV, VCR, Personal Stereo, Portable | ox mem > fe] CD, etc. =] 1.Use the supplied stereo mini-jack 3.5mm cable. 2.Plug one end into the A/V unit's Line Out or mini-jack input. 3.Plug the other end into the transmitter input. TV, VCR, video disc, I wn 0 disc, Ea + a Left channel (white) ee aC eal 0 Right channel ed) 1.Use the supplied stereo mini-jack 3.5 mm cable. 2 Plug one end into the input of the transmitter. 3.
POWER SOURCE Transmitter adapter-DC 18V/100mA 1.Connect the supplied AC power adapter to an electrical outlet. 2.Plug the AC power adapter into the DC jack. Wireless Stereo Rear Speaker (AC Operation) 1.Turn the power OFF. 2.Connect the supplied AC power adapters to electrical outlets. 3.Plug the AC power adapters ind C inputs of both speakers.
OPERATING THE SYSTEM 1. Tum on the audio/video equipment connected to the transmitter. 2.Press down the ball switch to turn on the power switch for speakers and adjust volume control on both speakers. 3.Adjust the tuning dial of speaker to the frequency | PEW which is same as transmitter's transmission raven So Fae] frequency for best Qe IZ reception. 4.Connect with surround sound system (Optional) 5.Use the three-step switch (L-MONO-R) for choosing your favorite sound effect.
Automatic Battery Recharging The speakers will automatically begin the recharging process once the AC power adapter is connected to an electrical outlet. The red LED "Charge" indicator will be illuminated during the recharging process. Normal Rechargeable Period: 16 hours. Wea) PRECAUTIONS Use only a 18V DC 100mA AC adapter for the transmitter. Use only the 12V DC 1000mA AC adapters for the speaker system. Do not use two transmitters at the same time. Other 900 MHz sources may cause interference.
TROUBLESHOOTING GUIDE SYMPTOM CAUSE SOLUTION NO SOUND The AC adapter is not connected to the transmitter and a wall outlet. The connected audio/video equipment is not playing. The volume of the audio/ video equipment is completely turned down, activating the automatic shut-off feature, The speaker batteries are exhausted. The speaker is not muted on | The volume of the speaker is turned down. Connect the AC adapter 10 the transmitter and wall outlet. Turn on all equipment.
