User's Manual BRIGHT HEADPHONE ELECTRONICS CO. FCC ID.
4 [Originate: High Frequency 900MHz WIRELESS STEREO CENTER SPEAKER SYSTEM CONGRATULATIONS! You now own a top-quality Bright product-thoroughly tested to be certain it meets our own exacting quality control standards. The Bright 900 MHz Wireless Stereo Center Speaker System is one of the most innovative new products on the market today. Please take a few moments to review the following important information before using these items.
OVERVIEW The High Frequency Wireless Stereo Center Speaker System uses the latest 900MHz wireless technology to enable you to enjoy music and TV sound anywhere inside or outside your home (speakers are not weather resistant). You can simply connect the supplied transmitter to any sound source such as a stereo, CO player, TV, etc, through either an audio fine output jack or headphone jack. This speaker system is easy to set up anywhere you want, without tuning speaker wires.
® (D Tuner (8 Tuner Power (9) Volume DC 18V Power @Transmitter 43 DC input FEBRILE QUORUM Three-step ~ Switch 13 Recharge Switch # Only use the supplied ®IC/SPK AC power adapter DR RIGHT (DCSVIB00mA ) Accessories | 1.Connecting cord | Stereo jack to 2 RCA plug (1) 2.Stereo mini-jack 3.5mm cable(1) | | 3.AC adapter for transmitter DC 18V/1 00mA(1) 4.AC adapters for speakers 12V 1000mA(2) | 5.Headphone jack adapter 6.3mm to 3.
INSTALLATION Connecting Transmitter TV, VCR, Personal Stereo, = Portable | qtr a0) — from] CD, etc, EF To center speaker i 1.Use the supplied stereo mini-jack 3.5mm cable. 2.Plug one end into the A/V unit's Line Out or mini-jack input. 3.Plug the other end into the transmitter input. [rv ver, video disc. | fete. | f Left channel (white) Ed —sn GC Pee} Right channel {red} 1.Use the supplied stereo mini-jack 3.5 mm cable. 2.Plug one end into the input of the transmitter, 3.
POWER SOURCE Transmitter 5 A fed AC adapter-DC 18V/100mA 1.Connect the supplied AC power adapter to an electrical outlet. 2.Plug the AC power adapter into the DC jack. Wireless Stereo Rear Speaker (AC Operation) J F) 1.Turn the power OFF. 2.Connect the supplied AC power adapters to electrical outlets. 3.Plug the AC power adapters ind C inputs of both speakers.
OPERATING THE SYSTEM 1. Turn on the audio/video equipment connected to the transmitter. 2.Press down the ball switch to turn on the power switch for speakers and adjust volume control on both speakers, 3.Adjust the tuning dial of speaker lo the frequency | PC18V which is same as ol transmitter's transmission val lr frequency for best @ U5 reception. SN 4.Connect with surround sound system (Optional) csc 5.Use the three-step switch (L-MONO-R) for choosing your favorite sound effect.
Automatic Battery Recharging The speakers will automatically begin the recharging process once the AC power adapter is connected to an electrical outlet. The red LED "Charge" indicator will be illuminated during the recharging process. Normal Rechargeable Period: 16 hours. RECAP UNIONS Use only a 18V DC 100mA AC adapter for the transmitter. Use only the 12V DC 1000mA AC adapters for the speaker system. Do not use two transmitters at the same time. Other 800 MHz sources may cause interference.
TROUBLESHOOTING GUIDE SYMPTOM CAUSE SOLUTION NO SOUND The AC adapter is not Connect the AC adapter connected to the transmitter | to the transmitter and wall and a wall outlet. outlet. The connected audio/video | Turn on all equipment. equipment is not playing, The volume of the audio/ Adjust the volume to an video equipment is appropriate level. completely turned down, activating the automatic shut-off feature. The speaker batteries are Replace the batteries. exhausted.
FCC APPLICATION FOR CERTIFICATION FOR BRIGHT HEADPHONE ELECTRONICS CO. 2ND FL. LANE 337, YOUNG HO ROAD, CHUNG HO CITY, TAIPEI SHINE, TAIWAN, R.O.C. FCC ID.: IERC1989 Submitted fo: Federal Communications Commission EQUIPMENT APPROVAL SERVICES P.O.
