user manual

24 BRIGGSandSTRATTON.COM
4. Actuate the throttle lever to check for proper movement
(Figure 42). The lever should move freely in both
directions.
5. If the linkages stick, spray lubricant on the lever and
manually move the lever. This should free the linkages. If
not, replace the carburetor.
Figure 42
2. Remove two screws that hold the stepper motor to the
carburetor assembly (F, Figure 41).
3. Locate the throttle lever (G).
NOTE: When removing the stepper motor from the carburetor
assembly, the spring (H) may become disengaged. Ensure
that the spring does not become lost.
Figure 41
G
F
H
Not
for
Reproduction