user manual

18 BRIGGSandSTRATTON.COM
Fuel Valve
The fuel valve is mounted behind the side maintenance cover.
Check the valve for proper operation as follows:
1. Using small, flat-head screwdriver, pry off cover to the
fuel valve knob (Figure 19).
Figure 19
2. Remove screw under the cover to remove the knob
(B, Figure 20).
3. Check the fuel valve for leaks (C, Figure 21).
If the fuel valve leaks, it must be replaced as follows:
1. Loosen four screws (Figure 22) on the control panel.
Figure 22
Figure 20
B
Figure 21
C
Not
for
Reproduction