Specifications

Fig. 24



4. Remove fixed main jet (7) using Screwdriver

#19062, Fig. 25.

5. Reach into carburetor throat with flat blade

screwdriver and push down on end of emulsion

tube (8).

Fig. 25





NOTE: Consult the IPL to get the high altitude jet

part number if required.

6. Remove idle jet plug (10) and idle jet (9), Fig. 26.

Fig. 26





7. Use a pliers to remove the idle mixture screw

adjustment limiter cap (11) if equipped, Fig. 27.

8. Remove the idle mixture screw (12).

Fig. 27

9. The top and bottom edges of the throttle plate

are beveled. Mark throttle plate (13) before

removing to ensure reinstallation in the original

position, Fig. 28.

Fig. 28

10. Use a punch as shown and remove throttle shaft

welch plug (14), Fig. 29.

Fig. 29

11. Remove snap ring (16) and washer (15), Fig. 30.

12. Remove throttle shaft, collar (17) and seal (18).

For Briggs & Stratton Discount Parts Call 606-678-9623 or 606-561-4983