Specifications

4LOCKED FOR PRINTING – SELECT SECT. NEEDED >

NOTE: Install the supports over the governor

control bracket, one side at a time to avoid

disturbing the governor adjustment. Install

the screws in the same order as removed.

3. Install the fuel tank base plate. Torque screws to

140 in. lbs. (16 Nm).

4. Install the air cleaner base. Torque screws (1),

Fig. 5 to 60 in. lbs. (7 Nm). Connect the breather

tube.

Fig. 5



5. Connect the fuel line to the carburetor. Install the

fuel tank. Torque screws (2) and shoulder bolts

(3) (PTO side) to 140 in. lbs. (16 Nm), Fig. 6.

Fig. 6





6. Connect the fuel shut-off valve link. Slide the

looped end of the link over the knob on the fuel

valve. Tighten the screw securely.

7. Install the air cleaner element, top plate and nut.

8. Install the top cover plate and knob.

9 Quart Fuel Tank

Removal

1. Remove air cleaner cover knobs (1) and cover

(2), Fig. 7.

Fig. 7





2. Remove air cleaner nut (3), top plate (4) and air

cleaner element, Fig. 8.

Fig. 8





3. Turn the fuel shut-off to the OFF position.

4. Remove 2 shoulder bolts (5) from each side of

the fuel tank, Fig. 9.

Fig. 9



For Briggs & Stratton Discount Parts Call 606-678-9623 or 606-561-4983